02 Grade comparison

Which Aspartame grade fits the brief?

Technical document 02 · Reviewed 2026-11-20 · Aspartame

On this page
  1. The grade map
  2. Sweetness and taste
  3. What changes between grades
  4. The grade decision
  5. How to run the trial
  6. Ordering and traceability
  7. How this document is controlled

Aspartame is published as a family of grades, not a single drum. The grade decides the particle size, the carrier, the taste, the dissolution behaviour and sometimes the carrier system. The table below is the published starting point; the specification for the chosen grade is the document that governs release.

In one line

The grade is decided by the dosage form and the process. Aspartame is no exception: Aspartame 99% powder and Aspartame granular can share an assay and still behave differently in the line.

The grade map

Aspartame grades
GradeBest fitWhat changes
Aspartame 99% powderBeverages and tabletopStandard grade
Aspartame granularDry blends and sachetsBetter flow, lower dust
Encapsulated aspartameBaked and high-heat systemsProtects the molecule through the process
Aspartame blendSweetener systemsBlend ratio and carrier must be declared

Sweetness and taste

The indicative sweetness is 180–220 × sucrose, indicative. That figure is a starting point, not a promise: sweetness depends on the matrix, the pH, the temperature, the other sweeteners and the person tasting. Clean, sucrose-like sweetness with a slower onset than Ace-K and a shorter tail than saccharin.

The use level is 0.01–0.06% in beverages, depending on the target sucrose equivalence. Use that range as a bench-trial window. The final level is set by the matrix, the process and the taste target.

What changes between grades

Particle size changes dissolution speed, dust and flow. A carrier changes the active content, the flow and the taste. A liquid grade adds water and a preservation requirement. A granulated grade can reduce dust and improve flow, but it may dissolve more slowly. None of these is a cosmetic difference, and none of them is captured by the assay alone.

The functional properties behind those differences are stated on the technical data sheet: Sparingly soluble in water; solubility increases at lower pH, and dissolution time matters in a beverage line. Moderate; store sealed below 25 °C.

The grade decision

The level-four page for this product compares Aspartame 99% powder with Ace-K. It sets out the choice in the terms that matter at the bench: taste, solubility, process and cost per unit of sweetness.

Aspartame vs Ace-K: which one carries the tail

Aspartame gives a sucrose-like sweetness that arrives late; Ace-K arrives fast and lingers bitter. The blend is often better than either.

How to run the trial

  1. Fix the target sucrose equivalence, not the powder weight. Compare grades at the same delivered sweetness.
  2. Test at the final pH, temperature and matrix. Water alone hides the acid and protein effects.
  3. Measure the sweetness at the start, the middle and the end of the shelf-life window.
  4. Check the physical result: clarity, colour, viscosity, crystallisation or mouthfeel as relevant.
  5. Record the lot number and the use level, so the result can be repeated on the next lot.

Ordering and traceability

The grade on the purchase order should match the grade in the specification and on the COA. A generic name on the order and a specific grade in the file is a documentation gap waiting for a reviewer to find it.

Read the related pages for this grade: Aspartame specification and grades, COA and batch testing and identity and adulteration.

How this document is controlled

This page is part of the technical file for Aspartame. It is reviewed when the specification, the analytical method or the packing changes. The date at the top of the page is the review date; the current specification should be checked before a launch.

The commercial document is the specification agreed with the buyer, the batch COA for the lot and the technical data sheet supplied with that lot. If this page and the agreed specification disagree, the agreed specification governs the order. The page exists to explain the reasoning behind the specification, so a quality, procurement or technical reviewer can see why each line is there.

The product hub for this grade is Aspartame: specification, grades and documents. The release workflow is described on the quality and documentation page, and the analytical method behind the primary assay is listed in the method library.

Quick inquiry

Ask about this grade

Name, company, email and the question. The product and the page you are reading travel with it, so there is nothing else to select.

We use your details only to answer this inquiry. Country is detected from your connection and used only for freight and compliance. Need a written quotation instead? The full form asks for quantity, preferred form, destination market and the documents you need — those answers are what turn a reply into a priced quotation instead of another round of questions.