Sweetener ingredients · Xi'an, China
A sweetness your formula can stand behind.
High-intensity sweeteners, polyols, rare sugars and soluble fibres for food, beverage and supplement manufacturers — named molecule, named analytical method, taste and solubility data, and a batch COA with every lot. No finished products; ingredients and blends only.
59
Specifications in production
354
Technical documents behind the published grades
1 kg
Entry quantity, packed from a released lot
1–7 days
Typical dispatch after release
The working position(01)
A sweetness multiple is not a specification. We document the difference.
Sweeteners fail quietly: a stevia grade with the wrong glycoside profile, a sucralose lot with an unidentified impurity, a polyol at the wrong particle size, a fibre figure from an unnamed method. The site is built around the questions a formulator and a quality team ask before the first trial.
Named molecule, named method
Every grade is specified to a molecule or a defined profile and an analytical method — Reb A and Reb M by HPLC-UV, polyols by HPLC-RI, fibre by an AOAC method. No unnamed totals.
The taste curve, not only the multiple
A 200× sweetener can arrive fast or slow, fade cleanly or leave a liquorice tail. The taste note, use level and blend behaviour are part of the specification.
Bulk and physical form
Polyols and fibres are chosen for crystallisation, cooling, hygroscopicity and viscosity, not only for sweetness. Particle size and moisture are release parameters.
Batch-level release
Identity, assay, physical parameters and the agreed contaminant panel are tested per lot and reported on the COA that ships with the drum.
Documents written first
The document pack is designed before the product page: COA, TDS, SDS, allergen and GMO statements, origin record and solvent statement.
Traceable lots
The lot number on the COA, the drum and the retained sample should match. A certificate without a lot number is a format, not a result.
The catalog(02)
6 ranges. 59 specifications, all in production.
Start from the sweetness job or the physical job: a high-intensity top note, a polyol bulk, a rare sugar with browning, or a soluble fibre with body. All 59 specifications are in production and available to order; each one already has its specification, method and document pack published.
Plant-Derived Sweeteners & Sweet Proteins
Steviol glycosides, monk fruit, licorice and sweet proteins
Steviol glycosides · monk fruit · licorice · sweet proteins
08High-Intensity Sweeteners
Synthetic and semisynthetic sweeteners
Sucralose · Ace-K · aspartame · saccharin
08Polyols & Sugar Alcohols
Bulk sweeteners for sugar-free and reduced-sugar systems
Erythritol · xylitol · maltitol · isomalt
07Rare & Functional Sugars
Allulose, tagatose, isomaltulose and pentoses
Allulose · tagatose · isomaltulose · trehalose
16Soluble Fibres & Prebiotic Carbohydrates
Inulin, oligosaccharides and resistant polymers
Inulin · FOS · GOS · XOS · polydextrose
05Sweetener Blends & Systems
Standard ratios and custom sweetener systems
Stevia-erythritol · monk fruit-erythritol · sucralose-Ace-K
Steviol Glycosides 95%
Steviol glycoside mixture (mainly stevioside and rebaudioside A) · CAS 57817-89-7 (stevioside)
≥95.0% (HPLC)
Rebaudioside A 98%
C₄₄H₇₀O₂₃ · CAS 58543-16-1
≥98.0% (HPLC)
Rebaudioside M 95%
C₅₆H₉₀O₃₃ · CAS 1220616-44-3
≥95.0% (HPLC)
Monk Fruit Extract 50%
Mogroside V and related cucurbitane glycosides · CAS 88901-36-4 (Mogroside V)
≥50.0% (HPLC)
Glycyrrhizin 98%
C₄₂H₆₂O₁₆ · CAS 1405-86-3
≥98.0% (HPLC)
Naringin Dihydrochalcone (NDC) 98%
C₂₇H₃₄O₁₄ · CAS 18916-17-1
≥98.0% (HPLC)
Thaumatin
Thaumatin protein (thaumatin I and II) · CAS 53850-34-3
≥95.0% (dry basis)
Neohesperidin Dihydrochalcone (NHDC) 98%
C₂₈H₃₆O₁₅ · CAS 20702-77-6
≥98.0% (HPLC)
Monoammonium Glycyrrhizinate 98%
C₄₂H₆₅NO₁₆ · CAS 53956-04-0
≥98.0% (HPLC)
Dipotassium Glycyrrhizinate 98%
C₄₂H₆₀K₂O₁₆ · CAS 68797-35-3
≥98.0% (HPLC)
Rubusoside 70%
C₃₂H₅₀O₁₃ · CAS 64849-39-4
≥70.0% (HPLC)
Glucosylated Steviol Glycosides 90%
Glucosylated steviol glycoside mixture · CAS —
≥90.0% (HPLC)
Brazzein 90%
Brazzein sweet protein · CAS —
≥90.0% (protein basis)
Monellin 90%
Monellin sweet protein · CAS —
≥90.0% (protein basis)
Monk Fruit Powder 10%
Siraitia grosvenorii fruit powder, 10% mogrosides · CAS —
≥10.0% (HPLC)
Sucralose
C₁₂H₁₉Cl₃O₈ · CAS 56038-13-2
98.0–102.0% (HPLC)
Acesulfame Potassium
C₄H₄KNO₄S · CAS 55589-62-3
99.0–101.0% (HPLC)
Aspartame
C₁₄H₁₈N₂O₅ · CAS 22839-47-0
98.0–102.0% (HPLC)
Saccharin Sodium (Dihydrate)
C₇H₅NNaO₃S·2H₂O · CAS 6155-57-3
99.0–101.0% (HPLC)
Neotame
C₂₀H₃₀N₂O₅ · CAS 165450-17-9
97.0–102.0% (HPLC)
Advantame
C₂₄H₃₀N₂O₇ · CAS 714229-20-6
97.0–102.0% (HPLC)
Sodium Cyclamate
C₆H₁₂NNaO₃S · CAS 139-05-9
98.0–101.0%
Aspartame-Acesulfame Salt (E962)
Aspartame-acesulfame salt · CAS 106372-55-8
53.0–57.0% (HPLC)
Erythritol
C₄H₁₀O₄ · CAS 149-32-6
99.0–100.5% (HPLC-RI)
Xylitol
C₅H₁₂O₅ · CAS 87-99-0
98.5–101.0% (HPLC-RI)
Sorbitol
C₆H₁₄O₆ · CAS 50-70-4
97.0–101.0% (HPLC-RI)
Maltitol
C₁₂H₂₄O₁₁ · CAS 585-88-6
98.0–101.0% (HPLC-RI)
Isomalt
1,6-GPS and 1,1-GPM mixture · CAS 64519-82-0
≥98.0% (HPLC-RI)
Mannitol
C₆H₁₄O₆ · CAS 69-65-8
98.0–101.0% (HPLC-RI)
Lactitol Monohydrate
C₁₂H₂₄O₁₁·H₂O · CAS 81025-04-9
≥98.0% (HPLC-RI)
Hydrogenated Starch Hydrolysates (HSH)
Hydrogenated starch hydrolysate mixture · CAS —
≥95.0% (HPLC-RI)
Allulose
C₆H₁₂O₆ · CAS 551-68-8
98.0–102.0% (HPLC-RI)
Tagatose
C₆H₁₂O₆ · CAS 87-81-0
98.0–102.0% (HPLC-RI)
Trehalose Dihydrate
C₁₂H₂₂O₁₁·2H₂O · CAS 6138-23-4
98.0–101.0% (HPLC-RI)
L-Arabinose
C₅H₁₀O₅ · CAS 5328-37-0
98.0–101.0% (HPLC-RI)
D-Xylose
C₅H₁₀O₅ · CAS 58-86-6
98.0–101.0% (HPLC-RI)
Isomaltulose
C₁₂H₂₂O₁₁ · CAS 13718-94-0
≥98.0% (HPLC-RI)
Crystalline Fructose
C₆H₁₂O₆ · CAS 57-48-7
≥99.5% (HPLC-RI)
Inulin
(C₆H₁₀O₅)n · CAS 9005-80-5
≥90.0% (HPLC-RI)
Fructooligosaccharides (FOS)
(C₆H₁₀O₅)n, n = 2–8 · CAS 308066-66-2
≥95.0% (HPLC-RI)
Galactooligosaccharides (GOS)
Galacto-oligosaccharide mixture · CAS 6587-31-1
≥70.0% (HPLC-RI)
Xylooligosaccharides (XOS)
(C₅H₈O₄)n · CAS —
≥95.0% (HPLC-RI)
Polydextrose
Glucose polymer with sorbitol and citric acid · CAS 68424-04-4
≥90.0% (HPLC-RI)
Resistant Dextrin
Indigestible dextrin · CAS —
≥85.0% (AOAC 2009.01)
Isomaltooligosaccharide (IMO) 90%
(C₆H₁₀O₅)n, α-1,6-linked · CAS —
≥90.0% (HPLC-RI)
Stachyose 98%
C₂₄H₄₂O₂₁ · CAS 470-55-3
≥98.0% (HPLC-RI)
Maltooligosaccharide 90%
(C₆H₁₀O₅)n, α-1,4-linked, n = 2–7 · CAS —
≥90.0% (HPLC-RI)
Acacia Gum (Gum Arabic)
Acacia senegal polysaccharide · CAS 9000-01-5
≥85.0% (AOAC 2009.01)
Partially Hydrolyzed Guar Gum (PHGG)
Partially hydrolysed guar galactomannan · CAS 9000-30-0 (guar gum basis)
≥85.0% (AOAC 2009.01)
Oat Beta-Glucan 70%
(1→3)(1→4)-β-D-glucan · CAS —
≥70.0% (AOAC 995.16)
Pectin (HM/LM)
Partially methylated polygalacturonic acid · CAS 9000-69-5
≥65.0% (dry basis)
Lactulose 70% Syrup
C₁₂H₂₂O₁₁ · CAS 4618-18-2
≥70.0% (HPLC-RI)
Soybean Oligosaccharides 60%
Soybean oligosaccharide mixture · CAS —
≥60.0% (HPLC-RI)
Raffinose 98%
C₁₈H₃₂O₁₆ · CAS 512-69-6
≥98.0% (HPLC-RI)
Stevia-Erythritol Blend 1%
Steviol glycosides 1% on erythritol · CAS —
0.9–1.1% (HPLC-UV)
Monk Fruit-Erythritol Blend 1%
Mogroside V 1% on erythritol · CAS —
0.9–1.1% (HPLC)
Sucralose-Ace-K Blend 25/75
Sucralose 25% and acesulfame potassium 75% · CAS —
24.5–25.5% (HPLC)
Allulose-Stevia Blend 5/95
Rebaudioside A 5% on allulose · CAS —
4.5–5.5% (HPLC-UV)
Monk Fruit-Allulose Blend 2/98
Mogroside V 2% on allulose · CAS —
1.8–2.2% (HPLC)
59 specifications. 354 technical documents.
Each published product carries its own hub, five technical documents and a level-four question on the grade decision buyers ask first. If you need a form, a blend or a particle size that is not published, send the specification — we will tell you whether it is attainable before quoting it.
Technical documentation (03)
Technical documentation
Five documents, one standard.
Quality and procurement pages for Steviol Glycosides 95%. Each card opens the full document; a sample COA and the technical data sheet are available on request.





Documentation
What arrives with the drum.
The commercial invoice is the least interesting document in the shipment. Six files do the real work of getting a sweetener released into a food or beverage formula.
Certificate of analysis
Batch-specific results for identity, assay, sweetness-relevant impurities, moisture, particle size, heavy metals and microbiology, with the method named against each parameter.
Technical data sheet
Chemical form, CAS number, specification ranges, sweetness versus sucrose, solubility, bulk density, recommended storage and the grades available for the same sweetener.
Safety data sheet
A 16-section SDS issued against the exact grade supplied, in the format your EHS team already files.
Allergen, GMO and origin statements
Declarations covering the major allergen list, gluten, animal-derived inputs, GMO status and the manufacturing site, signed for the batch.
Residual solvent and contaminant statements
The solvent system used in purification, plus heavy-metal and microbiological results against the destination-market limits.
Specification comparison
A line-by-line comparison of our specification against the one you sent, including where we cannot match and why.
Before you buy
Inspect the paperwork first.
A supplier's document format is a preview of how they work. Download a specimen COA, a specimen TDS and the sweetener selection guide before you request a quotation.
Specimen COA · steviol glycosides
The certificate format used for a released lot: parameter, method, release limit and result, with the identity block, the contaminant panel and the lot fields.
Specimen TDS · steviol glycosides
Technical data sheet layout: chemical identity, CAS, specification ranges, sweetness, solubility, bulk density, packing, storage and the grades available.
Sweetener selection guide
A one-page comparison of the six ranges by sweetness, bulk, solubility, heat behaviour and the applications each one fits.
Custom blends(04)
When the catalog grade is not the grade you need.
Particle size, granulation, a carrier and a two-component blend can be adjusted around your process. The chemistry stays the same, or the change is quoted as a new specification after a feasibility review.
Brief
The specification, the target sweetness, the application, the particle size and the destination market.
Feasibility
We confirm what the mill, the blender and the sieve can hold, and what changes in the specification and the packing.
Sample
A sample of the proposed grade is tested in your matrix before the blend or the particle size is quoted.
First lot
The revised specification, COA and packing are agreed in writing, then released against them.
Testing and release
Every number is tested against a method.
Release is not a visual check. Each lot is tested against the parameters agreed in the quotation, and the COA names the method beside every result. Third-party verification is available for heavy metals and microbiology.
Certified to NSF 455-2 GMP, ISO 22000, HACCP, ISO 9001, HALAL, USDA Organic and EU Organic. Current certificate copies are available with the quotation.
| Panel | Parameters |
|---|---|
| Identity and assay | Specific marker assay by HPLC or HPLC-RI, with the chromatographic method named · Identity by retention time, IR spectrum or mass confirmation where the grade requires it · Related substances and breakdown products relevant to the sweetener family · Moisture by Karl Fischer or loss on drying, stated on the basis used |
| Physical and process | Appearance, colour and odour · Particle size distribution and bulk density · Solubility, clarity of solution and pH where relevant · Sweetness equivalence and taste notes at a stated use level |
| Contaminants | Lead, arsenic, cadmium and mercury by ICP-MS · Microbiology: APC, yeast and mould, E. coli, Salmonella · Residual solvents matched to the purification system · Foreign matter and ash where the grade requires it |
| Documentation | Batch COA · TDS · SDS · allergen and GMO statements · origin record · solvent statement |
Who we supply(05)
Built for the people who release the batch.
The buyer, the formulator and the quality manager need different things from a sweetener supplier. The applications pages describe the constraint each product format places on the grade.
Beverage brands
You need a clear solution, a clean sweetness curve and a grade that survives pasteurisation and shelf life without drifting.
Confectionery and bakery
You need bulk, crystallisation control and browning behaviour, not only a sweetness multiple on a certificate.
Dairy and plant-based
You need a sweetener that works with protein, acid and homogenisation, and a taste profile that does not read as artificial.
Supplement and functional food
You need a low-use-rate sweetener or a sugar-free bulk system that fits a stick pack, gummy, tablet or capsule.
What happens next
From brief to released lot.
No automated sales sequence. One contact owns the request from the specification review to the batch documents.
Sourcing notes (06)
Read before you compare quotes.
Technical notes from the people who prepare the specifications. Written for buyers, not for search engines.
All posts →How to read a sweetener COA: the six lines that decide the grade
A certificate can be complete and still tell you nothing about the grade. These six lines separate a usable sweetener COA from a page of percentages.
Read the note →Sucrose equivalence: the number that decides the dose
A sweetener is 200 times sweeter than sucrose — at one concentration, in one matrix, on one panel. Here is how to turn that number into a real use level.
Read the note →Reb A vs Reb M: what the glycoside profile buys
Two stevia grades can share a 95% headline and taste completely different. The difference is the glycoside, not the percentage.
Read the note →Buyer questions
Before you send the brief.
The questions that come up before a first order, answered without a sales sequence.
What does a published specification include?
The chemical identity, assay and its method, the physical parameters that decide the application, the sweetness and solubility profile, the MOQ and the document pack. Each product page links to the documents behind those lines.
Which documents come with a batch?
A batch COA, TDS, SDS, allergen and GMO statements, an origin record and a residual-solvent statement. Third-party heavy-metal or microbiological reports can be added where the buyer's review requires them.
Can you match a sweetener from another supplier?
Yes. Send the specification, a current COA or a sample. We confirm the form, assay range, particle size, moisture limit and document pack we can match, and quote against a written counter-specification.
What is the minimum order?
One kilogram, packed from a released lot with that lot's COA. Bulk quantities are packed in 25 kg fiber drums or paper sacks with a food-grade liner.
Do you supply samples?
Yes. Samples are typically 100–500 g and are sent with the COA of the lot they were drawn from, usually within 3–5 business days after the specification is agreed.
How do you handle taste and sweetness questions?
The TDS states an indicative sweetness versus sucrose and the taste notes at a named use level. The final test is your matrix: dose, pH, temperature, protein and the other sweeteners all change the curve. We test alongside you rather than quote a single number as a promise.
Request a quotation
Send the specification. We will send the grade.
Include the sweetener, the assay, the sweetness target, the application and the destination. If you only have a competitor's COA, send that — it is enough to start.