02 Grade comparison

Which Rebaudioside A 98% grade fits the brief?

Technical document 02 · Reviewed 2026-11-20 · Rebaudioside A 98%

On this page
  1. The grade map
  2. Sweetness and taste
  3. What changes between grades
  4. The grade decision
  5. How to run the trial
  6. Ordering and traceability
  7. How this document is controlled

Rebaudioside A 98% is published as a family of grades, not a single drum. The grade decides the particle size, the carrier, the taste, the dissolution behaviour and sometimes the carrier system. The table below is the published starting point; the specification for the chosen grade is the document that governs release.

In one line

The grade is decided by the dosage form and the process. Rebaudioside A 98% is no exception: Reb A 98% powder and Reb A 98% granular can share an assay and still behave differently in the line.

The grade map

Rebaudioside A 98% grades
GradeBest fitWhat changes
Reb A 98% powderBeverages, tabletop, dairyStandard clean-taste grade
Reb A 98% granularDry mixes and tabletopBetter flow, lower dust
Reb A 95%Cost-sensitive food useHigher stevioside fraction; taste test required
Organic Reb AOrganic-certified productsCertificate and lot traceability required

Sweetness and taste

The indicative sweetness is 200–300 × sucrose, indicative. That figure is a starting point, not a promise: sweetness depends on the matrix, the pH, the temperature, the other sweeteners and the person tasting. Cleaner than a total glycoside grade, with a faster onset and less liquorice linger; a sweet aftertaste remains at high dose.

The use level is 0.01–0.06% in beverages, depending on target sucrose equivalence and the blend. Use that range as a bench-trial window. The final level is set by the matrix, the process and the taste target.

What changes between grades

Particle size changes dissolution speed, dust and flow. A carrier changes the active content, the flow and the taste. A liquid grade adds water and a preservation requirement. A granulated grade can reduce dust and improve flow, but it may dissolve more slowly. None of these is a cosmetic difference, and none of them is captured by the assay alone.

The functional properties behind those differences are stated on the technical data sheet: Freely soluble in water; clear at use levels and compatible with typical beverage processing. Moderately hygroscopic; reseal the liner after use and store below 25 °C.

The grade decision

The level-four page for this product compares Reb A 98% with Reb M 95%. It sets out the choice in the terms that matter at the bench: taste, solubility, process and cost per unit of sweetness.

Reb A 98% vs Reb M 95%: which stevia grade fits the brief

Reb A and Reb M are different glycosides. A higher Reb A percentage does not buy the cleaner, faster sweetness of Reb M.

How to run the trial

  1. Fix the target sucrose equivalence, not the powder weight. Compare grades at the same delivered sweetness.
  2. Test at the final pH, temperature and matrix. Water alone hides the acid and protein effects.
  3. Measure the sweetness at the start, the middle and the end of the shelf-life window.
  4. Check the physical result: clarity, colour, viscosity, crystallisation or mouthfeel as relevant.
  5. Record the lot number and the use level, so the result can be repeated on the next lot.

Ordering and traceability

The grade on the purchase order should match the grade in the specification and on the COA. A generic name on the order and a specific grade in the file is a documentation gap waiting for a reviewer to find it.

Read the related pages for this grade: Rebaudioside A 98% specification and grades, COA and batch testing and identity and adulteration.

How this document is controlled

This page is part of the technical file for Rebaudioside A 98%. It is reviewed when the specification, the analytical method or the packing changes. The date at the top of the page is the review date; the current specification should be checked before a launch.

The commercial document is the specification agreed with the buyer, the batch COA for the lot and the technical data sheet supplied with that lot. If this page and the agreed specification disagree, the agreed specification governs the order. The page exists to explain the reasoning behind the specification, so a quality, procurement or technical reviewer can see why each line is there.

The product hub for this grade is Rebaudioside A 98%: specification, grades and documents. The release workflow is described on the quality and documentation page, and the analytical method behind the primary assay is listed in the method library.

Quick inquiry

Ask about this grade

Name, company, email and the question. The product and the page you are reading travel with it, so there is nothing else to select.

We use your details only to answer this inquiry. Country is detected from your connection and used only for freight and compliance. Need a written quotation instead? The full form asks for quantity, preferred form, destination market and the documents you need — those answers are what turn a reply into a priced quotation instead of another round of questions.