02 Grade comparison

Which Steviol Glycosides 95% grade fits the brief?

Technical document 02 · Reviewed 2026-11-20 · Steviol Glycosides 95%

On this page
  1. The grade map
  2. Sweetness and taste
  3. What changes between grades
  4. The grade decision
  5. How to run the trial
  6. Ordering and traceability
  7. How this document is controlled

Steviol Glycosides 95% is published as a family of grades, not a single drum. The grade decides the particle size, the carrier, the taste, the dissolution behaviour and sometimes the carrier system. The table below is the published starting point; the specification for the chosen grade is the document that governs release.

In one line

The grade is decided by the dosage form and the process. Steviol Glycosides 95% is no exception: Steviol Glycosides 95% and Rebaudioside A 98% can share an assay and still behave differently in the line.

The grade map

Steviol Glycosides 95% grades
GradeBest fitWhat changes
Steviol Glycosides 95%General beverage, tabletop and food useBalanced glycoside profile at the lowest cost per sweetness unit
Rebaudioside A 98%Cleaner taste, lower steviosideHigher purity, lower linger, higher cost
Rebaudioside M 95%Premium clean-label beveragesFaster onset and less aftertaste; highest cost
Organic gradeOrganic-certified finished productsRequires organic certificate and lot traceability

Sweetness and taste

The indicative sweetness is 200–300 × sucrose, indicative. That figure is a starting point, not a promise: sweetness depends on the matrix, the pH, the temperature, the other sweeteners and the person tasting. Sweet with a slower onset and a liquorice-like linger at higher doses; mouthfeel thins in water unless a bulk sweetener is added.

The use level is 0.01–0.08% in ready-to-drink beverages, depending on target sucrose equivalence. Use that range as a bench-trial window. The final level is set by the matrix, the process and the taste target.

What changes between grades

Particle size changes dissolution speed, dust and flow. A carrier changes the active content, the flow and the taste. A liquid grade adds water and a preservation requirement. A granulated grade can reduce dust and improve flow, but it may dissolve more slowly. None of these is a cosmetic difference, and none of them is captured by the assay alone.

The functional properties behind those differences are stated on the technical data sheet: Freely soluble in water; solutions are clear at typical use levels and remain stable across beverage pH. Moderately hygroscopic; store sealed below 25 °C and 60% RH.

The grade decision

The level-four page for this product compares Total steviol glycosides ≥95% with Reb A ≥98%. It sets out the choice in the terms that matter at the bench: taste, solubility, process and cost per unit of sweetness.

Total steviol glycosides vs Reb A: what the percentage is measuring

A total glycoside figure sums a family of molecules with different taste curves; a Reb A figure names one of them.

How to run the trial

  1. Fix the target sucrose equivalence, not the powder weight. Compare grades at the same delivered sweetness.
  2. Test at the final pH, temperature and matrix. Water alone hides the acid and protein effects.
  3. Measure the sweetness at the start, the middle and the end of the shelf-life window.
  4. Check the physical result: clarity, colour, viscosity, crystallisation or mouthfeel as relevant.
  5. Record the lot number and the use level, so the result can be repeated on the next lot.

Ordering and traceability

The grade on the purchase order should match the grade in the specification and on the COA. A generic name on the order and a specific grade in the file is a documentation gap waiting for a reviewer to find it.

Read the related pages for this grade: Steviol Glycosides 95% specification and grades, COA and batch testing and identity and adulteration.

How this document is controlled

This page is part of the technical file for Steviol Glycosides 95%. It is reviewed when the specification, the analytical method or the packing changes. The date at the top of the page is the review date; the current specification should be checked before a launch.

The commercial document is the specification agreed with the buyer, the batch COA for the lot and the technical data sheet supplied with that lot. If this page and the agreed specification disagree, the agreed specification governs the order. The page exists to explain the reasoning behind the specification, so a quality, procurement or technical reviewer can see why each line is there.

The product hub for this grade is Steviol Glycosides 95%: specification, grades and documents. The release workflow is described on the quality and documentation page, and the analytical method behind the primary assay is listed in the method library.

Quick inquiry

Ask about this grade

Name, company, email and the question. The product and the page you are reading travel with it, so there is nothing else to select.

We use your details only to answer this inquiry. Country is detected from your connection and used only for freight and compliance. Need a written quotation instead? The full form asks for quantity, preferred form, destination market and the documents you need — those answers are what turn a reply into a priced quotation instead of another round of questions.