02 Grade comparison

Which Isomaltulose grade fits the brief?

Technical document 02 · Reviewed 2026-11-20 · Isomaltulose

On this page
  1. The grade map
  2. Sweetness and taste
  3. What changes between grades
  4. The grade decision
  5. How to run the trial
  6. Ordering and traceability
  7. How this document is controlled

Isomaltulose is published as a family of grades, not a single drum. The grade decides the particle size, the carrier, the taste, the dissolution behaviour and sometimes the carrier system. The table below is the published starting point; the specification for the chosen grade is the document that governs release.

In one line

The grade is decided by the dosage form and the process. Isomaltulose is no exception: Isomaltulose crystalline and Isomaltulose granular can share an assay and still behave differently in the line.

The grade map

Isomaltulose grades
GradeBest fitWhat changes
Isomaltulose crystallineBeverages and bakeryStandard grade
Isomaltulose granularTabletop and dry mixesBetter flow
Isomaltulose fine powderDry blendsFaster dispersion

Sweetness and taste

The indicative sweetness is 40–50% of sucrose, indicative. That figure is a starting point, not a promise: sweetness depends on the matrix, the pH, the temperature, the other sweeteners and the person tasting. Clean, sucrose-like sweetness with no strong cooling; the body is closer to sugar than a high-intensity sweetener.

The use level is 5–30% in beverages, bakery and confectionery, depending on the sugar replacement. Use that range as a bench-trial window. The final level is set by the matrix, the process and the taste target.

What changes between grades

Particle size changes dissolution speed, dust and flow. A carrier changes the active content, the flow and the taste. A liquid grade adds water and a preservation requirement. A granulated grade can reduce dust and improve flow, but it may dissolve more slowly. None of these is a cosmetic difference, and none of them is captured by the assay alone.

The functional properties behind those differences are stated on the technical data sheet: Soluble in water; low hygroscopicity and a clean solution. Low; easier to store than fructose or sorbitol.

The grade decision

The level-four page for this product compares Isomaltulose with Isomaltulose granular. It sets out the choice in the terms that matter at the bench: taste, solubility, process and cost per unit of sweetness.

Isomaltulose vs sucrose: bulk and sweetness are different

Isomaltulose is about half as sweet as sucrose, so replacing sucrose one-for-one changes both the sweetness and the bulk.

How to run the trial

  1. Fix the target sucrose equivalence, not the powder weight. Compare grades at the same delivered sweetness.
  2. Test at the final pH, temperature and matrix. Water alone hides the acid and protein effects.
  3. Measure the sweetness at the start, the middle and the end of the shelf-life window.
  4. Check the physical result: clarity, colour, viscosity, crystallisation or mouthfeel as relevant.
  5. Record the lot number and the use level, so the result can be repeated on the next lot.

Ordering and traceability

The grade on the purchase order should match the grade in the specification and on the COA. A generic name on the order and a specific grade in the file is a documentation gap waiting for a reviewer to find it.

Read the related pages for this grade: Isomaltulose specification and grades, COA and batch testing and identity and adulteration.

How this document is controlled

This page is part of the technical file for Isomaltulose. It is reviewed when the specification, the analytical method or the packing changes. The date at the top of the page is the review date; the current specification should be checked before a launch.

The commercial document is the specification agreed with the buyer, the batch COA for the lot and the technical data sheet supplied with that lot. If this page and the agreed specification disagree, the agreed specification governs the order. The page exists to explain the reasoning behind the specification, so a quality, procurement or technical reviewer can see why each line is there.

The product hub for this grade is Isomaltulose: specification, grades and documents. The release workflow is described on the quality and documentation page, and the analytical method behind the primary assay is listed in the method library.

Quick inquiry

Ask about this grade

Name, company, email and the question. The product and the page you are reading travel with it, so there is nothing else to select.

We use your details only to answer this inquiry. Country is detected from your connection and used only for freight and compliance. Need a written quotation instead? The full form asks for quantity, preferred form, destination market and the documents you need — those answers are what turn a reply into a priced quotation instead of another round of questions.