Soluble Fibres & Prebiotic Carbohydrates · Core range

Galactooligosaccharides (GOS)

Galacto-oligosaccharide mixture · CAS 6587-31-1 · Galactooligosaccharide syrup or powder

A GOS syrup or powder for soluble fibre and body in beverages, dairy and supplements, with the DP profile, lactose figure and fibre method declared.

SW-041 Reviewed 20 November 2026 5 technical documents

GOS (dry basis)
≥70.0%
Minimum order
1 kg
Indicative sweetness
20–30% of sucrose
Indicative lead time
1–7 days

Specification

What the certificate will report

GOS (dry basis)≥70.0% (HPLC-RI)
Dietary fibre≥70.0% (AOAC 2009.01 or equivalent)
Degree of polymerisationDP 2–8
Lactose≤10.0% (HPLC-RI)
AppearanceColourless to light yellow syrup or white powder
Moisture≤5.0% (powder); 25% solids in syrup
pH (10% solution)4.0–7.0
SolubilityFreely soluble in water
Particle size≥95% through 80 mesh (powder)
Heavy metalsPb ≤0.5 · As ≤0.5 · Cd ≤0.5 · Hg ≤0.1 mg/kg
MicrobiologyAPC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent
Chemical formulaGalacto-oligosaccharide mixture
CAS6587-31-1
Marker setGOS ≥70%, DP 2–8, lactose ≤10%
AppearanceColourless to light yellow syrup or white powder
SolubilityFreely soluble in water; low viscosity and a clean solution at use levels.

Primary method HPLC-RI — the full HPLC-RI method guide explains what the figure proves. How the COA is built →

Quick inquiry

Ask about this grade

Name, company, email and the question. The product and the page you are reading travel with it, so there is nothing else to select.

We use your details only to answer this inquiry. Country is detected from your connection and used only for freight and compliance. Need a written quotation instead? The full form asks for quantity, preferred form, destination market and the documents you need — those answers are what turn a reply into a priced quotation instead of another round of questions.

Sweetness and application

What the grade tastes like

Indicative sweetness20–30% of sucrose, indicative
Taste noteMild, clean sweetness with a slightly milky note; useful in dairy and beverage systems.
Starting use level2–8% in beverages and dairy, depending on the fibre target
Blend behaviourBlends with inulin and FOS; it adds soluble fibre with low viscosity and a clean taste.

Taste is matrix-specific The figures above are a starting point for a bench trial, not a promise of the finished product. How the matrix changes the result →

Onset Medium
Finish Short
Mouthfeel Neutral
Off-note Mild; milky note

Indicative profile curated from the published taste note. Confirm it in your matrix.

Process fit

Water

Freely soluble in water

Heat

Stable in dry form and through normal beverage processing

pH

Most stable at pH 4–7

Moisture

Hygroscopic

Ordering

Entry quantity, packing and sample

Minimum order1 kg
Indicative lead time1–7 days
Standard pack1 kg foil pouch · 25 kg fiber drum · 250 kg drum for syrup
Sample100–500 g with lot COA

Availability In production and available to order. The batch COA, pack and lead time are confirmed against the order.

Samples are drawn from a released lot and travel with that lot's COA. The pack and the retained sample are recorded on the lot file.

What to confirm before ordering

  • Confirm the lactose figure and the GOS DP profile.
  • Check colour and viscosity in the final beverage.
  • GOS is dairy-derived; check the allergen and lactose declaration.
  • Taste at the final dose; the milky note can be useful or unwanted.

Buyer questions

Practical answers

What is Galactooligosaccharides (GOS) specified to?

GOS (dry basis): ≥70.0% (HPLC-RI). The full specification adds Dietary fibre, Degree of polymerisation, Lactose, Appearance, Moisture and the contaminant panel. Every figure on the batch COA is reported with the method used to produce it.

Which fibre method and DP profile is this?

The catalog grade is Galactooligosaccharide syrup or powder. The fibre figure is method-specific, and the degree of polymerisation decides the viscosity, solubility and sweetness. The grade page sets out the analytical basis and the forms.

Which applications does this grade fit?

Beverages, Dairy, Supplements, Infant nutrition, Bakery. The grade is selected against the application and the process: solubility and clarity for a beverage, bulk and crystallisation for confectionery, flow and compaction for a tabletop or supplement.

Which documents are supplied with the batch?

A batch-specific COA, TDS, SDS, allergen and GMO statements, an origin record and a residual-solvent statement. Third-party heavy-metal or microbiological reports can be arranged, and the specification comparison is issued before the first order.

What is the minimum order and lead time?

1 kg minimum, packed in a 1 kg foil pouch from a released lot; 25 kg fiber drums are available as quantities scale. 1–7 days after specification and order confirmation. Samples are typically 100–500 g and carry the COA of the lot they were drawn from.

Documentation

Released with every lot

  • Batch-specific certificate of analysis against the agreed specification
  • Technical data sheet with form, CAS or species, carrier, storage and packing
  • Safety data sheet in the 16-section format
  • Allergen, GMO and origin statements signed for the batch
  • Residual-solvent statement for the purification system
  • Specification comparison against the specification you sent

Next step

Send the spec. We will confirm the form.

A competitor COA, a target dose or a matrix brief is enough to start. We reply with the grade we can release, the documents behind it and the questions we still need answered.