02.1 Grade decision

XOS powder vs liquid: low viscosity in two forms

Technical document 02.1 · Reviewed 2026-11-20 · Xylooligosaccharides (XOS)

On this page
  1. The two options
  2. Taste and sweetness
  3. Solubility and process
  4. Grade and use level
  5. The decision
  6. A three-day trial plan
  7. How this document is controlled

The fibre is easy either way; the water is not is a formulation question, not a catalogue question. XOS is soluble and low-viscosity in both forms. The difference is the water, the solids and the preservation. This page compares the two options in the terms that decide a bench trial: identity, taste, solubility, process and the cost per unit of sweetness.

In one line

XOS is soluble and low-viscosity in both forms. The difference is the water, the solids and the preservation.

The two options

XOS powder vs liquid: low viscosity in two forms
OptionWhat it is
Option APowder: 95% XOS, easy to weigh, hygroscopic, good for a dry blend or a capsule.
Option BLiquid 70%: easy to pump, lower solids, water activity and preservation implications.

Taste and sweetness

The published sweetness for Xylooligosaccharides (XOS) is 20–30% of sucrose, indicative. That figure is an average, and the difference between the two options is usually in the shape of the curve rather than the peak intensity. Mild, clean sweetness with a slight woody note at high dose; low viscosity makes it easy in beverages.

Run the comparison at equal sucrose equivalence. If one option is dosed by weight and the other by active content, convert both to the same delivered sweetness before the panel tastes them. A difference in the use level is not a difference in taste unless the delivery is matched.

Solubility and process

Powder: 95% XOS, easy to weigh, hygroscopic, good for a dry blend or a capsule. Liquid 70%: easy to pump, lower solids, water activity and preservation implications. The practical questions are whether the material dissolves or disperses at the target use level, whether it survives the heat step, and whether it changes the viscosity or the clarity of the finished product.

For this product, Freely soluble in water; low viscosity and a clean solution. Stable in dry form; acidic hydrolysis should be checked at low pH and high heat. A bench trial that ignores the process step can pick the wrong option with a clean conscience.

Grade and use level

The published grades are XOS powder 95%, XOS liquid 70%, XOS 90%, XOS 99%. The primary specification is ≥95.0% (HPLC-RI). The use level is application-specific: start from the target sucrose equivalence, then adjust for the matrix, the process and the other sweeteners in the formula.

For this grade, Freely soluble in water; low viscosity and a clean solution. 1–5% in beverages and supplements, depending on the fibre target is the current starting window; confirm it in a bench trial rather than scaling directly from the catalogue.

The decision

Choose the powder when the formula is dry and the moisture is controlled. Choose the liquid when the line is already liquid and the water is in the batch sheet. Recalculate the fibre dose per kilogram of the form supplied.

The recommendation is a starting point, not a rule. The final choice belongs to the formula, the process and the market, and it should be recorded with the trial result and the lot numbers so it can be repeated.

A three-day trial plan

  1. Day one: prepare stock solutions or pre-blends of both options at equal sucrose equivalence.
  2. Day two: taste in the real matrix at the real pH, with the real process, and record the onset, peak, tail and any off-note.
  3. Day three: repeat the tasting after the heat step or 24 hours of hold, and compare the physical result: clarity, colour, viscosity or crystallisation.

Keep the two stock solutions labelled with the lot and the use level. A trial without the lot number is an anecdote, and an anecdote is expensive to scale.

Read the related pages for this grade: Xylooligosaccharides (XOS) specification and grades, COA and batch testing and identity and adulteration.

How this document is controlled

This page is part of the technical file for Xylooligosaccharides (XOS). It is reviewed when the specification, the analytical method or the packing changes. The date at the top of the page is the review date; the current specification should be checked before a launch.

The commercial document is the specification agreed with the buyer, the batch COA for the lot and the technical data sheet supplied with that lot. If this page and the agreed specification disagree, the agreed specification governs the order. The page exists to explain the reasoning behind the specification, so a quality, procurement or technical reviewer can see why each line is there.

The product hub for this grade is Xylooligosaccharides (XOS): specification, grades and documents. The release workflow is described on the quality and documentation page, and the analytical method behind the primary assay is listed in the method library.

Quick inquiry

Ask about this grade

Name, company, email and the question. The product and the page you are reading travel with it, so there is nothing else to select.

We use your details only to answer this inquiry. Country is detected from your connection and used only for freight and compliance. Need a written quotation instead? The full form asks for quantity, preferred form, destination market and the documents you need — those answers are what turn a reply into a priced quotation instead of another round of questions.