HPLC with UV detection for sweeteners
HPLC-UV is the standard assay for many high-intensity sweeteners. The sample is dissolved, injected onto a reversed-phase column and separated into its components, which are detected by their absorption at a chosen wavelength. The peak area against a reference standard gives the assay; the peak pattern gives the identity evidence.
In short
A separation method for sweeteners that absorb ultraviolet light, such as steviol glycosides, sucralose and NHDC.
How the separation works
A reversed-phase C18 column retains the less polar components more strongly, so a gradient of water and acetonitrile separates the glycosides, the related substances and the matrix. Steviol glycosides are detected at about 210 nm, sucralose at 192–210 nm and NHDC at 280 nm. The wavelength is chosen for the chromophore, not for convenience.
The column temperature, the flow rate and the gradient are part of the method. A small change in the gradient can move a critical pair of peaks into each other, and the integration of a shoulder is where two laboratories start to disagree. The certificate should name the method and the reference standard, and the chromatogram should be available on request.
What the result proves
The result proves the amount of the named material in the sample and the presence of the peaks that the method resolves. For a steviol glycoside grade it can show Reb A, stevioside and Reb C separately; for a sucralose grade it can show the related substances. That is more informative than a single total, but it is still a measurement against a standard.
The method does not prove the botanical source, the manufacturing route or the taste. A fermentation-derived Reb M and a leaf-extracted Reb M can return the same HPLC result. If the customer specifies a source route, the route needs a separate document.
What it proves
- The assay of the named compound against a reference standard.
- The presence and approximate level of related substances that absorb at the detection wavelength.
- The ratio between glycosides in a stevia or monk fruit grade, where the method resolves them.
What it does not prove
- The botanical or fermentation source of the material.
- Compounds without a chromophore at the chosen wavelength.
- The taste in the finished matrix.
- The exact crystal form or particle size.
What to ask the laboratory
- Which column, mobile phase and detection wavelength were used?
- Which reference standard was used, and is it certified?
- Can you send the chromatogram for this lot?
- How is the system suitability checked before the run?
Read the assay against the reference standard and the method, then look at the related-substance profile. A 98% assay with a large unknown peak is not the same grade as a 98% assay with a clean chromatogram. Ask for the chromatogram when the difference matters.
Where the method is used
- Steviol Glycosides 95% — Purified steviol glycoside extract, ≥95% total glycosides.
- Rebaudioside A 98% — Rebaudioside A, purified steviol glycoside.
- Sucralose — Trichlorogalactosucrose, crystalline powder.
The method pages sit behind the COA page. The terms used here are defined in the buyer glossary, and the release limits are on the product specification.
Related documents
Send the certificate or specification you are reviewing and we will name the method behind each figure.
Request a specification review