Hard candy, gum, chocolate and chews
Confectionery
Sugar-free confectionery is a crystallisation and texture problem before it is a sweetness problem. The bulk sweetener decides whether the candy sets, shines and survives the pack.
The brief
Replacing sucrose in confectionery means replacing its bulk, its crystallisation behaviour, its browning and its mouthfeel, not only its sweetness. Isomalt and maltitol carry hard candy and chocolate; xylitol and sorbitol carry gum and chews; erythritol adds cooling and a clean taste. This page sets out the grade questions behind a sugar-free confectionery trial: crystal form, particle size, hygroscopicity, cooling and texture.
Matched ingredients
- Isomalt — ≥98.0% (HPLC-RI)
- Maltitol — 98.0–101.0% (HPLC-RI)
- Xylitol — 98.5–101.0% (HPLC-RI)
- Erythritol — 99.0–100.5% (HPLC-RI)
- Sorbitol — 97.0–101.0% (HPLC-RI)
What changes in this format
Three constraints, one grade decision.
The same powder can pass one constraint and fail another. The trial should test all three.
Bulk, not only sweetness
A high-intensity sweetener at a few parts per million cannot replace the bulk of sugar. The recipe needs a polyol or a fibre for the mass, the glass structure and the mouthfeel.
Crystallisation and humidity
Isomalt, maltitol, xylitol and erythritol crystallise differently and pick up water at different rates. The crystal form and particle size belong in the specification, not in a footnote.
Cooling and texture
Erythritol and xylitol cool strongly; maltitol and isomalt less so. The cooling is a recipe and texture decision, not only a taste decision. Test the finished candy, gum or chocolate, not only the powder.
Ingredients for this application
Starting points, not a shortlist limit.
Every grade is quoted against the specification and the process, not against the application label.
Isomalt
1,6-GPS and 1,1-GPM mixture · CAS 64519-82-0
≥98.0% (HPLC-RI)
Maltitol
C₁₂H₂₄O₁₁ · CAS 585-88-6
98.0–101.0% (HPLC-RI)
Xylitol
C₅H₁₂O₅ · CAS 87-99-0
98.5–101.0% (HPLC-RI)
Erythritol
C₄H₁₀O₄ · CAS 149-32-6
99.0–100.5% (HPLC-RI)
Sorbitol
C₆H₁₄O₆ · CAS 50-70-4
97.0–101.0% (HPLC-RI)
Steviol Glycosides 95%
Steviol glycoside mixture (mainly stevioside and rebaudioside A) · CAS 57817-89-7 (stevioside)
≥95.0% (HPLC)
Lactitol Monohydrate
C₁₂H₂₄O₁₁·H₂O · CAS 81025-04-9
≥98.0% (HPLC-RI)
Isomaltulose
C₁₂H₂₂O₁₁ · CAS 13718-94-0
≥98.0% (HPLC-RI)
Hydrogenated Starch Hydrolysates (HSH)
Hydrogenated starch hydrolysate mixture · CAS —
≥95.0% (HPLC-RI)
Next step
Describe the finished product. We will name the grade.
The dose, the process step, the taste and the destination are enough to start a specification review.