Polyols & Sugar Alcohols · Core range

Sorbitol

C₆H₁₄O₆ · CAS 50-70-4 · D-Glucitol, crystalline powder or aqueous solution

A sorbitol powder and 70% solution for humectancy, sugar-free bulk and tablet filling, specified by assay, moisture and the form that matches the process.

SW-026 Reviewed 20 November 2026 5 technical documents

Assay (dried basis)
97.0–101.0%
Minimum order
1 kg
Indicative sweetness
50–60% of sucrose
Indicative lead time
1–7 days

Specification

What the certificate will report

Assay (dried basis)97.0–101.0% (HPLC-RI)
AppearanceWhite crystalline powder or granules
Moisture≤1.0% (powder)
pH (5% solution)4.5–7.0
SolubilityFreely soluble in water; hygroscopic
Particle size≥95% through 60 mesh; granular on request
Bulk density0.55–0.85 g/mL
Reducing sugars≤0.2%
Heavy metalsPb ≤0.5 · As ≤0.5 · Cd ≤0.5 · Hg ≤0.1 mg/kg
MicrobiologyAPC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent
Chemical formulaC₆H₁₄O₆
CAS50-70-4
Marker setSorbitol 97.0–101.0%, reducing sugars ≤0.2%
AppearanceWhite crystalline powder or granules
SolubilityFreely soluble in water; strongly hygroscopic and used as a humectant as well as a sweetener.

Primary method HPLC-RI — the full HPLC-RI method guide explains what the figure proves. How the COA is built →

Quick inquiry

Ask about this grade

Name, company, email and the question. The product and the page you are reading travel with it, so there is nothing else to select.

We use your details only to answer this inquiry. Country is detected from your connection and used only for freight and compliance. Need a written quotation instead? The full form asks for quantity, preferred form, destination market and the documents you need — those answers are what turn a reply into a priced quotation instead of another round of questions.

Sweetness and application

What the grade tastes like

Indicative sweetness50–60% of sucrose, indicative
Taste noteMild sweetness with a slight cooling effect and a soft mouthfeel; less sweet than xylitol.
Starting use level2–15% in confectionery, bakery and oral care, depending on the function
Blend behaviourBlends with maltitol, xylitol and high-intensity sweeteners; it adds humectancy and bulk.

Taste is matrix-specific The figures above are a starting point for a bench trial, not a promise of the finished product. How the matrix changes the result →

Onset Medium
Finish Short
Mouthfeel Slight cooling
Off-note Soft, slightly syrupy body

Indicative profile curated from the published taste note. Confirm it in your matrix.

Sweetness calculator

Enter the target sucrose sweetness to estimate the use level.

Estimated use level13.33–16.00%
Per kg / litre133.33–160.00 g per kg / L

Estimate only, based on the published sweetness range and 1 L ≈ 1 kg. The matrix, process and blend decide the final level.

Process fit

Water

Freely soluble in water

Heat

Stable in dry form and through normal processing

pH

Stable across normal food pH

Moisture

Highly hygroscopic

Ordering

Entry quantity, packing and sample

Minimum order1 kg
Indicative lead time1–7 days
Standard pack1 kg foil pouch · 25 kg fiber drum · 250 kg drum for solution
Sample100–500 g with lot COA

Availability In production and available to order. The batch COA, pack and lead time are confirmed against the order.

Samples are drawn from a released lot and travel with that lot's COA. The pack and the retained sample are recorded on the lot file.

What to confirm before ordering

  • Confirm the 70% solution solids or the powder moisture, not both as one figure.
  • Test caking and flow at the target humidity.
  • Sorbitol is hygroscopic; control the storage humidity.
  • A 70% solution contributes water; update the solids calculation.

Buyer questions

Practical answers

What is Sorbitol specified to?

Assay (dried basis): 97.0–101.0% (HPLC-RI). The full specification adds Appearance, Moisture, pH (5% solution), Solubility, Particle size and the contaminant panel. Every figure on the batch COA is reported with the method used to produce it.

Which polyol and crystal form is this?

The catalog grade is D-Glucitol, crystalline powder or aqueous solution. Moisture, particle size and the other-polyol profile are release parameters, not packing details. The grade page explains the crystal forms and the applications each one fits.

Which applications does this grade fit?

Confectionery, Bakery, Oral care, Tabletting, Beverages. The grade is selected against the application and the process: solubility and clarity for a beverage, bulk and crystallisation for confectionery, flow and compaction for a tabletop or supplement.

Which documents are supplied with the batch?

A batch-specific COA, TDS, SDS, allergen and GMO statements, an origin record and a residual-solvent statement. Third-party heavy-metal or microbiological reports can be arranged, and the specification comparison is issued before the first order.

What is the minimum order and lead time?

1 kg minimum, packed in a 1 kg foil pouch from a released lot; 25 kg fiber drums are available as quantities scale. 1–7 days after specification and order confirmation. Samples are typically 100–500 g and carry the COA of the lot they were drawn from.

Documentation

Released with every lot

  • Batch-specific certificate of analysis against the agreed specification
  • Technical data sheet with form, CAS or species, carrier, storage and packing
  • Safety data sheet in the 16-section format
  • Allergen, GMO and origin statements signed for the batch
  • Residual-solvent statement for the purification system
  • Specification comparison against the specification you sent

Next step

Send the spec. We will confirm the form.

A competitor COA, a target dose or a matrix brief is enough to start. We reply with the grade we can release, the documents behind it and the questions we still need answered.