02 Grade comparison

Which Allulose grade fits the brief?

Technical document 02 · Reviewed 2026-11-20 · Allulose

On this page
  1. The grade map
  2. Sweetness and taste
  3. What changes between grades
  4. The grade decision
  5. How to run the trial
  6. Ordering and traceability
  7. How this document is controlled

Allulose is published as a family of grades, not a single drum. The grade decides the particle size, the carrier, the taste, the dissolution behaviour and sometimes the carrier system. The table below is the published starting point; the specification for the chosen grade is the document that governs release.

In one line

The grade is decided by the dosage form and the process. Allulose is no exception: Allulose crystalline and Allulose powder, fine can share an assay and still behave differently in the line.

The grade map

Allulose grades
GradeBest fitWhat changes
Allulose crystallineBakery, frozen dessert, tabletopBrowning and bulk
Allulose powder, fineDry blendsFaster dispersion
Allulose liquid 70%Beverage and syrup linesSolids and preservation must be specified
Organic alluloseOrganic-certified productsCertificate and traceability required

Sweetness and taste

The indicative sweetness is 60–70% of sucrose, indicative. That figure is a starting point, not a promise: sweetness depends on the matrix, the pH, the temperature, the other sweeteners and the person tasting. Clean sweetness close to sucrose with a slightly slower onset and a clean finish; it browns and bulks like a sugar.

The use level is 2–10% in beverages and bakery, depending on the sugar replacement. Use that range as a bench-trial window. The final level is set by the matrix, the process and the taste target.

What changes between grades

Particle size changes dissolution speed, dust and flow. A carrier changes the active content, the flow and the taste. A liquid grade adds water and a preservation requirement. A granulated grade can reduce dust and improve flow, but it may dissolve more slowly. None of these is a cosmetic difference, and none of them is captured by the assay alone.

The functional properties behind those differences are stated on the technical data sheet: Freely soluble in water; solutions are clean and compatible with beverage processing. Low; the crystalline grade is easy to store compared with fructose or sorbitol.

The grade decision

The level-four page for this product compares Crystalline with Liquid 70%. It sets out the choice in the terms that matter at the bench: taste, solubility, process and cost per unit of sweetness.

Allulose crystalline vs liquid: browning, solids and the line

A 70% allulose syrup is not 70% of the sweetness of the crystal per kilogram; it carries water that changes solids, preservation and browning.

How to run the trial

  1. Fix the target sucrose equivalence, not the powder weight. Compare grades at the same delivered sweetness.
  2. Test at the final pH, temperature and matrix. Water alone hides the acid and protein effects.
  3. Measure the sweetness at the start, the middle and the end of the shelf-life window.
  4. Check the physical result: clarity, colour, viscosity, crystallisation or mouthfeel as relevant.
  5. Record the lot number and the use level, so the result can be repeated on the next lot.

Ordering and traceability

The grade on the purchase order should match the grade in the specification and on the COA. A generic name on the order and a specific grade in the file is a documentation gap waiting for a reviewer to find it.

Read the related pages for this grade: Allulose specification and grades, COA and batch testing and identity and adulteration.

How this document is controlled

This page is part of the technical file for Allulose. It is reviewed when the specification, the analytical method or the packing changes. The date at the top of the page is the review date; the current specification should be checked before a launch.

The commercial document is the specification agreed with the buyer, the batch COA for the lot and the technical data sheet supplied with that lot. If this page and the agreed specification disagree, the agreed specification governs the order. The page exists to explain the reasoning behind the specification, so a quality, procurement or technical reviewer can see why each line is there.

The product hub for this grade is Allulose: specification, grades and documents. The release workflow is described on the quality and documentation page, and the analytical method behind the primary assay is listed in the method library.

Quick inquiry

Ask about this grade

Name, company, email and the question. The product and the page you are reading travel with it, so there is nothing else to select.

We use your details only to answer this inquiry. Country is detected from your connection and used only for freight and compliance. Need a written quotation instead? The full form asks for quantity, preferred form, destination market and the documents you need — those answers are what turn a reply into a priced quotation instead of another round of questions.