Rare & Functional Sugars · Specialty

Allulose

C₆H₁₂O₆ · CAS 551-68-8 · D-Allulose, crystalline powder or liquid

A crystalline allulose for reduced-sugar beverages, bakery and frozen desserts, with the browning and sweetness behaviour of a sugar and the physical data stated up front.

SW-032 Reviewed 20 November 2026 5 technical documents

Assay (dried basis)
98.0–102.0%
Minimum order
1 kg
Indicative sweetness
60–70% of sucrose
Indicative lead time
3–10 days

Specification

What the certificate will report

Assay (dried basis)98.0–102.0% (HPLC-RI)
AppearanceWhite crystalline powder
Moisture≤1.0%
pH (10% solution)4.0–7.0
SolubilityFreely soluble in water
Particle size≥95% through 60 mesh
Bulk density0.50–0.80 g/mL
Other sugars≤1.0% (HPLC)
Heavy metalsPb ≤0.5 · As ≤0.5 · Cd ≤0.5 · Hg ≤0.1 mg/kg
MicrobiologyAPC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent
Chemical formulaC₆H₁₂O₆
CAS551-68-8
Marker setAllulose 98.0–102.0%, other sugars ≤1.0%
AppearanceWhite crystalline powder
SolubilityFreely soluble in water; solutions are clean and compatible with beverage processing.

Primary method HPLC-RI — the full HPLC-RI method guide explains what the figure proves. How the COA is built →

Quick inquiry

Ask about this grade

Name, company, email and the question. The product and the page you are reading travel with it, so there is nothing else to select.

We use your details only to answer this inquiry. Country is detected from your connection and used only for freight and compliance. Need a written quotation instead? The full form asks for quantity, preferred form, destination market and the documents you need — those answers are what turn a reply into a priced quotation instead of another round of questions.

Sweetness and application

What the grade tastes like

Indicative sweetness60–70% of sucrose, indicative
Taste noteClean sweetness close to sucrose with a slightly slower onset and a clean finish; it browns and bulks like a sugar.
Starting use level2–10% in beverages and bakery, depending on the sugar replacement
Blend behaviourBlends with stevia, monk fruit and erythritol; it restores the body and browning that a high-intensity sweetener lacks.

Taste is matrix-specific The figures above are a starting point for a bench trial, not a promise of the finished product. How the matrix changes the result →

Onset Medium
Finish Medium
Mouthfeel Neutral
Off-note Clean; can brown

Indicative profile curated from the published taste note. Confirm it in your matrix.

Sweetness calculator

Enter the target sucrose sweetness to estimate the use level.

Estimated use level11.43–13.33%
Per kg / litre114.29–133.33 g per kg / L

Estimate only, based on the published sweetness range and 1 L ≈ 1 kg. The matrix, process and blend decide the final level.

Process fit

Water

Freely soluble in water

Heat

Participates in browning and caramelisation, which is useful in bakery and a consideration in clear be…

pH

Stable across normal food pH

Moisture

Low

Ordering

Entry quantity, packing and sample

Minimum order1 kg
Indicative lead time3–10 days
Standard pack1 kg foil pouch · 25 kg fiber drum
Sample100–500 g with lot COA

Availability In production and available to order. The batch COA, pack and lead time are confirmed against the order.

Samples are drawn from a released lot and travel with that lot's COA. The pack and the retained sample are recorded on the lot file.

What to confirm before ordering

  • Check colour after the heat step and at shelf-life end.
  • Confirm the allulose solids and the body in a low-calorie beverage.
  • Allulose browns; test the bake or the pasteurisation, not only the sweetness.
  • Ask for the other-sugar profile, not only the allulose assay.

Buyer questions

Practical answers

What is Allulose specified to?

Assay (dried basis): 98.0–102.0% (HPLC-RI). The full specification adds Appearance, Moisture, pH (10% solution), Solubility, Particle size and the contaminant panel. Every figure on the batch COA is reported with the method used to produce it.

Which rare sugar and hydrate is this?

The catalog grade is D-Allulose, crystalline powder or liquid. The hydrate or anomer and the other-sugar profile are part of the specification. The grade page compares the forms and states what changes in the specification and the process.

Which applications does this grade fit?

Beverages, Bakery, Frozen desserts, Confectionery, Tabletop. The grade is selected against the application and the process: solubility and clarity for a beverage, bulk and crystallisation for confectionery, flow and compaction for a tabletop or supplement.

Which documents are supplied with the batch?

A batch-specific COA, TDS, SDS, allergen and GMO statements, an origin record and a residual-solvent statement. Third-party heavy-metal or microbiological reports can be arranged, and the specification comparison is issued before the first order.

What is the minimum order and lead time?

1 kg minimum, packed in a 1 kg foil pouch from a released lot; 25 kg fiber drums are available as quantities scale. 3–10 days after specification and order confirmation. Samples are typically 100–500 g and carry the COA of the lot they were drawn from.

Documentation

Released with every lot

  • Batch-specific certificate of analysis against the agreed specification
  • Technical data sheet with form, CAS or species, carrier, storage and packing
  • Safety data sheet in the 16-section format
  • Allergen, GMO and origin statements signed for the batch
  • Residual-solvent statement for the purification system
  • Specification comparison against the specification you sent

Next step

Send the spec. We will confirm the form.

A competitor COA, a target dose or a matrix brief is enough to start. We reply with the grade we can release, the documents behind it and the questions we still need answered.