Which Maltooligosaccharide 90% grade fits the brief?
Maltooligosaccharide 90% is published as a family of grades, not a single drum. The grade decides the particle size, the carrier, the taste, the dissolution behaviour and sometimes the carrier system. The table below is the published starting point; the specification for the chosen grade is the document that governs release.
The grade is decided by the dosage form and the process. Maltooligosaccharide 90% is no exception: MOS 90% powder and MOS 90% syrup can share an assay and still behave differently in the line.
The grade map
| Grade | Best fit | What changes |
|---|---|---|
| MOS 90% powder | Beverages and supplements | Standard grade |
| MOS 90% syrup | Syrup lines | Water and solids must be specified |
| MOS 70% syrup | Cost-sensitive food use | Lower active load |
Sweetness and taste
The indicative sweetness is 40–60% of sucrose, indicative. That figure is a starting point, not a promise: sweetness depends on the matrix, the pH, the temperature, the other sweeteners and the person tasting. Mild, clean sweetness with a little body; less sweet than sucrose.
The use level is 3–10% in beverages and foods, depending on the fibre target. Use that range as a bench-trial window. The final level is set by the matrix, the process and the taste target.
What changes between grades
Particle size changes dissolution speed, dust and flow. A carrier changes the active content, the flow and the taste. A liquid grade adds water and a preservation requirement. A granulated grade can reduce dust and improve flow, but it may dissolve more slowly. None of these is a cosmetic difference, and none of them is captured by the assay alone.
The functional properties behind those differences are stated on the technical data sheet: Freely soluble in water; low viscosity. Hygroscopic; store sealed.
The grade decision
The level-four page for this product compares Powder with Syrup. It sets out the choice in the terms that matter at the bench: taste, solubility, process and cost per unit of sweetness.
Maltooligosaccharide powder vs syrup: solids and handling
A 75% MOS syrup delivers 25% water and a different fibre dose per kilogram than the powder.
How to run the trial
- Fix the target sucrose equivalence, not the powder weight. Compare grades at the same delivered sweetness.
- Test at the final pH, temperature and matrix. Water alone hides the acid and protein effects.
- Measure the sweetness at the start, the middle and the end of the shelf-life window.
- Check the physical result: clarity, colour, viscosity, crystallisation or mouthfeel as relevant.
- Record the lot number and the use level, so the result can be repeated on the next lot.
Ordering and traceability
The grade on the purchase order should match the grade in the specification and on the COA. A generic name on the order and a specific grade in the file is a documentation gap waiting for a reviewer to find it.
Read the related pages for this grade: Maltooligosaccharide 90% specification and grades, COA and batch testing and identity and adulteration.
How this document is controlled
This page is part of the technical file for Maltooligosaccharide 90%. It is reviewed when the specification, the analytical method or the packing changes. The date at the top of the page is the review date; the current specification should be checked before a launch.
The commercial document is the specification agreed with the buyer, the batch COA for the lot and the technical data sheet supplied with that lot. If this page and the agreed specification disagree, the agreed specification governs the order. The page exists to explain the reasoning behind the specification, so a quality, procurement or technical reviewer can see why each line is there.
The product hub for this grade is Maltooligosaccharide 90%: specification, grades and documents. The release workflow is described on the quality and documentation page, and the analytical method behind the primary assay is listed in the method library.
In this document
Related documents
Quick inquiry
Ask about this grade
Name, company, email and the question. The product and the page you are reading travel with it, so there is nothing else to select.