Soluble Fibres & Prebiotic Carbohydrates · Specialty
Maltooligosaccharide 90%
(C₆H₁₀O₅)n, α-1,4-linked, n = 2–7 · CAS — · Maltooligosaccharide powder or syrup
A maltooligosaccharide for mild sweetness and body, with the DP profile, sugar content and fibre method stated for the exact grade.
SW-047 Reviewed 20 November 2026 5 technical documents
- Maltooligosaccharide (dry basis)
- ≥90.0%
- Minimum order
- 1 kg
- Indicative sweetness
- 40–60% of sucrose
- Indicative lead time
- 3–10 days
Specification
What the certificate will report
| Maltooligosaccharide (dry basis) | ≥90.0% (HPLC-RI) |
|---|---|
| Degree of polymerisation | DP 2–7 |
| Dietary fibre | ≥80.0% (AOAC 2009.01) |
| Appearance | White to light yellow powder or syrup |
| Moisture | ≤5.0% (powder) |
| pH (10% solution) | 4.0–6.5 |
| Solubility | Freely soluble in water |
| Ash | ≤0.5% |
| Heavy metals | Pb ≤0.5 · As ≤0.5 · Cd ≤0.5 · Hg ≤0.1 mg/kg |
| Microbiology | APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent |
| Chemical formula | (C₆H₁₀O₅)n, α-1,4-linked, n = 2–7 |
| CAS | — |
| Marker set | MOS ≥90%, DP 2–7, fibre ≥80% |
| Appearance | White to light yellow powder |
| Solubility | Freely soluble in water; low viscosity. |
Primary method HPLC-RI — the full HPLC-RI method guide explains what the figure proves. How the COA is built →
Quick inquiry
Ask about this grade
Name, company, email and the question. The product and the page you are reading travel with it, so there is nothing else to select.
Sweetness and application
What the grade tastes like
| Indicative sweetness | 40–60% of sucrose, indicative |
|---|---|
| Taste note | Mild, clean sweetness with a little body; less sweet than sucrose. |
| Starting use level | 3–10% in beverages and foods, depending on the fibre target |
| Blend behaviour | Blends with IMO and inulin; adds body without much sweetness. |
Taste is matrix-specific The figures above are a starting point for a bench trial, not a promise of the finished product. How the matrix changes the result →
Indicative profile curated from the published taste note. Confirm it in your matrix.
Sweetness calculator
Enter the target sucrose sweetness to estimate the use level.
Estimate only, based on the published sweetness range and 1 L ≈ 1 kg. The matrix, process and blend decide the final level.
Process fit
Freely soluble in water
Stable in dry form
Stable across normal food pH
Hygroscopic
Ordering
Entry quantity, packing and sample
Availability In production and available to order. The batch COA, pack and lead time are confirmed against the order.
Samples are drawn from a released lot and travel with that lot's COA. The pack and the retained sample are recorded on the lot file.
Technical documentation
Five documents, one standard.
Quality and procurement pages for Maltooligosaccharide 90%. Each card opens the full document; a sample COA and the technical data sheet are available on request.





What to confirm before ordering
- Confirm the DP profile and the sugar content.
- Check the powder flow and caking at the target humidity.
- Confirm the exact identity, carrier and particle size for Maltooligosaccharide 90% before the first order.
- Taste at the target sucrose equivalence in the real matrix, not in water alone.
Buyer questions
Practical answers
What is Maltooligosaccharide 90% specified to?
Maltooligosaccharide (dry basis): ≥90.0% (HPLC-RI). The full specification adds Degree of polymerisation, Dietary fibre, Appearance, Moisture, pH (10% solution) and the contaminant panel. Every figure on the batch COA is reported with the method used to produce it.
Which fibre method and DP profile is this?
The catalog grade is Maltooligosaccharide powder or syrup. The fibre figure is method-specific, and the degree of polymerisation decides the viscosity, solubility and sweetness. The grade page sets out the analytical basis and the forms.
Which applications does this grade fit?
Beverages, Dairy, Bakery, Supplements, Confectionery. The grade is selected against the application and the process: solubility and clarity for a beverage, bulk and crystallisation for confectionery, flow and compaction for a tabletop or supplement.
Which documents are supplied with the batch?
A batch-specific COA, TDS, SDS, allergen and GMO statements, an origin record and a residual-solvent statement. Third-party heavy-metal or microbiological reports can be arranged, and the specification comparison is issued before the first order.
What is the minimum order and lead time?
1 kg minimum, packed in a 1 kg foil pouch from a released lot; 25 kg fiber drums are available as quantities scale. 3–10 days after specification and order confirmation. Samples are typically 100–500 g and carry the COA of the lot they were drawn from.
Documentation
Released with every lot
- Batch-specific certificate of analysis against the agreed specification
- Technical data sheet with form, CAS or species, carrier, storage and packing
- Safety data sheet in the 16-section format
- Allergen, GMO and origin statements signed for the batch
- Residual-solvent statement for the purification system
- Specification comparison against the specification you sent
Next step
Send the spec. We will confirm the form.
A competitor COA, a target dose or a matrix brief is enough to start. We reply with the grade we can release, the documents behind it and the questions we still need answered.