Soluble Fibres & Prebiotic Carbohydrates · Specialty

Oat Beta-Glucan 70%

(1→3)(1→4)-β-D-glucan · CAS — · Oat beta-glucan concentrate, 70% beta-glucan

A 70% oat beta-glucan concentrate for soluble fibre and viscosity, with the beta-glucan method, protein and ash data.

SW-050 Reviewed 20 November 2026 5 technical documents

Beta-glucan
≥70.0%
Minimum order
1 kg
Indicative sweetness
Not sweet at use levels
Indicative lead time
3–10 days

Specification

What the certificate will report

Beta-glucan≥70.0% (AOAC 995.16)
Dietary fibre≥75.0% (AOAC 2009.01)
AppearanceOff-white to light brown powder
Moisture≤6.0%
pH (1% suspension)5.0–7.5
SolubilityDispersible in water; viscosity depends on the grade
Particle size≥95% through 80 mesh
Protein≤8.0%
Heavy metalsPb ≤0.5 · As ≤0.5 · Cd ≤0.5 · Hg ≤0.1 mg/kg
MicrobiologyAPC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent
Chemical formula(1→3)(1→4)-β-D-glucan
CAS—
Marker setBeta-glucan ≥70% (AOAC 995.16)
AppearanceOff-white to light brown powder
SolubilityDispersible in water; builds viscosity and can form a gel at higher concentrations.

Primary method AOAC 995.16 and AOAC 2009.01 — the method behind each figure matters as much as the figure. How the COA is built →

Quick inquiry

Ask about this grade

Name, company, email and the question. The product and the page you are reading travel with it, so there is nothing else to select.

We use your details only to answer this inquiry. Country is detected from your connection and used only for freight and compliance. Need a written quotation instead? The full form asks for quantity, preferred form, destination market and the documents you need — those answers are what turn a reply into a priced quotation instead of another round of questions.

Sweetness and application

What the grade tastes like

Indicative sweetnessNot sweet at use levels
Taste noteMild cereal note; used for fibre and body, not sweetness.
Starting use level0.5–5% in beverages and foods, depending on the fibre and viscosity target
Blend behaviourBlends with inulin, PHGG and high-intensity sweeteners; adds viscosity and body.

Taste is matrix-specific The figures above are a starting point for a bench trial, not a promise of the finished product. How the matrix changes the result →

Onset Slow
Finish Short
Mouthfeel Neutral
Off-note Cereal note; not sweet

Indicative profile curated from the published taste note. Confirm it in your matrix.

Process fit

Water

Dispersible in water

Heat

Stable in dry form

pH

Stable across normal food pH

Moisture

Hygroscopic

Ordering

Entry quantity, packing and sample

Minimum order1 kg
Indicative lead time3–10 days
Standard pack1 kg foil pouch · 25 kg fiber drum
Sample100–500 g with lot COA

Availability In production and available to order. The batch COA, pack and lead time are confirmed against the order.

Samples are drawn from a released lot and travel with that lot's COA. The pack and the retained sample are recorded on the lot file.

What to confirm before ordering

  • Ask for the beta-glucan method and the protein/ash figures.
  • Check viscosity and cereal note in the matrix.
  • Confirm the exact identity, carrier and particle size for Oat Beta-Glucan 70% before the first order.
  • Taste at the target sucrose equivalence in the real matrix, not in water alone.

Buyer questions

Practical answers

What is Oat Beta-Glucan 70% specified to?

Beta-glucan: ≥70.0% (AOAC 995.16). The full specification adds Dietary fibre, Appearance, Moisture, pH (1% suspension), Solubility and the contaminant panel. Every figure on the batch COA is reported with the method used to produce it.

Which fibre method and DP profile is this?

The catalog grade is Oat beta-glucan concentrate, 70% beta-glucan. The fibre figure is method-specific, and the degree of polymerisation decides the viscosity, solubility and sweetness. The grade page sets out the analytical basis and the forms.

Which applications does this grade fit?

Beverages, Bakery, Dairy, Supplements, Cereal. The grade is selected against the application and the process: solubility and clarity for a beverage, bulk and crystallisation for confectionery, flow and compaction for a tabletop or supplement.

Which documents are supplied with the batch?

A batch-specific COA, TDS, SDS, allergen and GMO statements, an origin record and a residual-solvent statement. Third-party heavy-metal or microbiological reports can be arranged, and the specification comparison is issued before the first order.

What is the minimum order and lead time?

1 kg minimum, packed in a 1 kg foil pouch from a released lot; 25 kg fiber drums are available as quantities scale. 3–10 days after specification and order confirmation. Samples are typically 100–500 g and carry the COA of the lot they were drawn from.

Documentation

Released with every lot

  • Batch-specific certificate of analysis against the agreed specification
  • Technical data sheet with form, CAS or species, carrier, storage and packing
  • Safety data sheet in the 16-section format
  • Allergen, GMO and origin statements signed for the batch
  • Residual-solvent statement for the purification system
  • Specification comparison against the specification you sent

Next step

Send the spec. We will confirm the form.

A competitor COA, a target dose or a matrix brief is enough to start. We reply with the grade we can release, the documents behind it and the questions we still need answered.