Sweetener Blends & Systems · Core range

Monk Fruit-Erythritol Blend 1%

Mogroside V 1% on erythritol · CAS — · Mogroside V on erythritol, dry blend

A 1% Mogroside V blend on erythritol for a clean, fruit-forward sweetness with bulk, specified by the active content, carrier and homogeneity.

SW-056 Reviewed 20 November 2026 5 technical documents

Mogroside V
0.9–1.1%
Minimum order
1 kg
Indicative sweetness
2–4 × sucrose
Indicative lead time
3–10 days

Specification

What the certificate will report

Mogroside V0.9–1.1% (HPLC)
Total mogrosides≥1.2% (HPLC)
Erythritol≥98.0% (HPLC-RI)
AppearanceWhite to off-white powder
Moisture≤0.5%
SolubilitySoluble in water
Particle size≥95% through 60 mesh
HomogeneitySpecified by the blend protocol
Heavy metalsPb ≤0.5 · As ≤0.5 · Cd ≤0.5 · Hg ≤0.1 mg/kg
MicrobiologyAPC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent
Chemical formulaMogroside V 1% on erythritol
CAS—
Marker setMogroside V 0.9–1.1%, erythritol ≥98%
AppearanceWhite to off-white powder
SolubilitySoluble in water; the erythritol dissolves endothermically.

Primary method HPLC-RI — the full HPLC-RI method guide explains what the figure proves. How the COA is built →

Quick inquiry

Ask about this grade

Name, company, email and the question. The product and the page you are reading travel with it, so there is nothing else to select.

We use your details only to answer this inquiry. Country is detected from your connection and used only for freight and compliance. Need a written quotation instead? The full form asks for quantity, preferred form, destination market and the documents you need — those answers are what turn a reply into a priced quotation instead of another round of questions.

Sweetness and application

What the grade tastes like

Indicative sweetness2–4 × sucrose, indicative
Taste noteClean, fruit-forward sweetness with erythritol cooling; less liquorice than stevia.
Starting use level1–10% in tabletop and beverages, depending on the sweetness and body target
Blend behaviourThe erythritol adds bulk and cooling; the monk fruit adds a rounder, fruit-forward note.

Taste is matrix-specific The figures above are a starting point for a bench trial, not a promise of the finished product. How the matrix changes the result →

Onset Medium
Finish Short
Mouthfeel Cooling
Off-note Fruit note plus cooling

Indicative profile curated from the published taste note. Confirm it in your matrix.

Sweetness calculator

Enter the target sucrose sweetness to estimate the use level.

Estimated use level2.00–4.00%
Per kg / litre20.00–40.00 g per kg / L

Estimate only, based on the published sweetness range and 1 L ≈ 1 kg. The matrix, process and blend decide the final level.

Process fit

Water

Soluble in water

Heat

Stable in dry form

pH

Stable across normal food pH

Moisture

Low to moderate

Ordering

Entry quantity, packing and sample

Minimum order1 kg
Indicative lead time3–10 days
Standard pack1 kg foil pouch · 25 kg fiber drum
Sample100–500 g with lot COA

Availability In production and available to order. The batch COA, pack and lead time are confirmed against the order.

Samples are drawn from a released lot and travel with that lot's COA. The pack and the retained sample are recorded on the lot file.

What to confirm before ordering

  • Confirm Mogroside V and the erythritol carrier.
  • Check homogeneity and the fruit note in the matrix.
  • Taste at the target sucrose equivalence in the real matrix, not in water alone.
  • Confirm mogroside v: 0.9–1.1% (HPLC). Check the method and reference standard on the COA.

Buyer questions

Practical answers

What is Monk Fruit-Erythritol Blend 1% specified to?

Mogroside V: 0.9–1.1% (HPLC). The full specification adds Total mogrosides, Erythritol, Appearance, Moisture, Solubility and the contaminant panel. Every figure on the batch COA is reported with the method used to produce it.

Which fibre method and DP profile is this?

The catalog grade is Mogroside V on erythritol, dry blend. The fibre figure is method-specific, and the degree of polymerisation decides the viscosity, solubility and sweetness. The grade page sets out the analytical basis and the forms.

Which applications does this grade fit?

Tabletop, Beverages, Dairy alternatives, Confectionery, Supplements. The grade is selected against the application and the process: solubility and clarity for a beverage, bulk and crystallisation for confectionery, flow and compaction for a tabletop or supplement.

Which documents are supplied with the batch?

A batch-specific COA, TDS, SDS, allergen and GMO statements, an origin record and a residual-solvent statement. Third-party heavy-metal or microbiological reports can be arranged, and the specification comparison is issued before the first order.

What is the minimum order and lead time?

1 kg minimum, packed in a 1 kg foil pouch from a released lot; 25 kg fiber drums are available as quantities scale. 3–10 days after specification and order confirmation. Samples are typically 100–500 g and carry the COA of the lot they were drawn from.

Documentation

Released with every lot

  • Batch-specific certificate of analysis against the agreed specification
  • Technical data sheet with form, CAS or species, carrier, storage and packing
  • Safety data sheet in the 16-section format
  • Allergen, GMO and origin statements signed for the batch
  • Residual-solvent statement for the purification system
  • Specification comparison against the specification you sent

Next step

Send the spec. We will confirm the form.

A competitor COA, a target dose or a matrix brief is enough to start. We reply with the grade we can release, the documents behind it and the questions we still need answered.