§ Analysis · glossary

Loss on drying

Glossary entry · Reviewed 18 November 2026 · All terms

The mass lost when a sample is dried under a defined temperature and time, expressed as a percentage.

Definition

Loss on drying is a simple gravimetric method. It reports all volatile matter under the test conditions, not only water, so it can overstate moisture when a residual solvent is present.

The method conditions are part of the result. A 105 °C oven and a vacuum desiccator can give different figures for the same material.

Why it matters in a specification

  • The LOD figure is often used to convert an as-is result to a dried basis.
  • A hydrate can lose water of crystallisation under the LOD conditions.
  • Two suppliers can report the same moisture by different methods.

What to ask a supplier

  1. What temperature and time were used for the LOD?
  2. Is the assay reported on an as-is or dried basis?
  3. Was KF used as well, and do the two results agree?

Where it appears

  • Sorbitol — D-Glucitol, crystalline powder or aqueous solution.
  • Isomalt — Isomalt, crystalline granules or powder.
  • Resistant Dextrin — Resistant dextrin, soluble fibre powder or syrup.

If a term in your specification is ambiguous, send the document and we will name the definition we would use.

Request a specification review