High-Intensity Sweeteners · Specialty

Aspartame-Acesulfame Salt (E962)

Aspartame-acesulfame salt · CAS 106372-55-8 · 1:1 salt of aspartame and acesulfame

A 1:1 aspartame-acesulfame salt for a rounded sweetness in beverages, with a defined ratio and homogeneity separate from a physical blend.

SW-023 Reviewed 20 November 2026 5 technical documents

Aspartame
53.0–57.0%
Minimum order
1 kg
Indicative sweetness
300–350 × sucrose
Indicative lead time
3–10 days

Specification

What the certificate will report

Aspartame53.0–57.0% (HPLC)
Acesulfame38.0–42.0% (HPLC)
AppearanceWhite crystalline powder
Moisture≤2.0%
pH (1% solution)3.0–5.0
SolubilitySparingly soluble in water; solubility increases at lower pH
Particle size≥95% through 80 mesh
Bulk density0.30–0.60 g/mL
Heavy metalsPb ≤0.5 · As ≤0.5 · Cd ≤0.5 · Hg ≤0.1 mg/kg
MicrobiologyAPC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent
Chemical formulaAspartame-acesulfame salt
CAS106372-55-8
Marker setAspartame and acesulfame in a 1:1 salt
AppearanceWhite crystalline powder
SolubilitySparingly soluble in water; more soluble at lower pH.

Primary method HPLC-UV — the full HPLC-UV method guide explains what the figure proves. How the COA is built →

Quick inquiry

Ask about this grade

Name, company, email and the question. The product and the page you are reading travel with it, so there is nothing else to select.

We use your details only to answer this inquiry. Country is detected from your connection and used only for freight and compliance. Need a written quotation instead? The full form asks for quantity, preferred form, destination market and the documents you need — those answers are what turn a reply into a priced quotation instead of another round of questions.

Sweetness and application

What the grade tastes like

Indicative sweetness300–350 × sucrose, indicative
Taste noteRounded sweetness with a faster onset than aspartame alone and a shorter tail than Ace-K alone.
Starting use level0.01–0.03% in beverages, depending on the target sucrose equivalence
Blend behaviourThe salt is itself the blend; the two components are not separately dosed in the finished formula.

Taste is matrix-specific The figures above are a starting point for a bench trial, not a promise of the finished product. How the matrix changes the result →

Onset Fast
Finish Medium
Mouthfeel Neutral
Off-note Rounded; Ace-K linger at high dose

Indicative profile curated from the published taste note. Confirm it in your matrix.

Sweetness calculator

Enter the target sucrose sweetness to estimate the use level.

Estimated use level0.023–0.027%
Per kg / litre0.23–0.27 g per kg / L

Estimate only, based on the published sweetness range and 1 L ≈ 1 kg. The matrix, process and blend decide the final level.

Process fit

Water

Sparingly soluble in water

Heat

Contains aspartame

pH

Most stable at mildly acidic pH

Moisture

Moderate

Ordering

Entry quantity, packing and sample

Minimum order1 kg
Indicative lead time3–10 days
Standard pack1 kg foil pouch · 25 kg fiber drum
Sample100–500 g with lot COA

Availability In production and available to order. The batch COA, pack and lead time are confirmed against the order.

Available forms Powder, 80 meshGranular

Samples are drawn from a released lot and travel with that lot's COA. The pack and the retained sample are recorded on the lot file.

What to confirm before ordering

  • Check the aspartame/acesulfame ratio and the moisture.
  • Validate the heat step; the aspartame fraction is the sensitive part.
  • Taste at the target sucrose equivalence in the real matrix, not in water alone.
  • Confirm aspartame: 53.0–57.0% (HPLC). Check the method and reference standard on the COA.

Buyer questions

Practical answers

What is Aspartame-Acesulfame Salt (E962) specified to?

Aspartame: 53.0–57.0% (HPLC). The full specification adds Acesulfame, Appearance, Moisture, pH (1% solution), Solubility and the contaminant panel. Every figure on the batch COA is reported with the method used to produce it.

Which exact high-intensity sweetener is this?

The catalog grade is 1:1 salt of aspartame and acesulfame. The salt, the physical form and the related-substance profile are part of the specification; the grade page compares the alternatives and explains what changes in the specification and the process.

Which applications does this grade fit?

Beverages, Tabletop, Dairy, Confectionery, Chewing gum. The grade is selected against the application and the process: solubility and clarity for a beverage, bulk and crystallisation for confectionery, flow and compaction for a tabletop or supplement.

Which documents are supplied with the batch?

A batch-specific COA, TDS, SDS, allergen and GMO statements, an origin record and a residual-solvent statement. Third-party heavy-metal or microbiological reports can be arranged, and the specification comparison is issued before the first order.

What is the minimum order and lead time?

1 kg minimum, packed in a 1 kg foil pouch from a released lot; 25 kg fiber drums are available as quantities scale. 3–10 days after specification and order confirmation. Samples are typically 100–500 g and carry the COA of the lot they were drawn from.

Documentation

Released with every lot

  • Batch-specific certificate of analysis against the agreed specification
  • Technical data sheet with form, CAS or species, carrier, storage and packing
  • Safety data sheet in the 16-section format
  • Allergen, GMO and origin statements signed for the batch
  • Residual-solvent statement for the purification system
  • Specification comparison against the specification you sent

Next step

Send the spec. We will confirm the form.

A competitor COA, a target dose or a matrix brief is enough to start. We reply with the grade we can release, the documents behind it and the questions we still need answered.