High-Intensity Sweeteners · Core range
Saccharin Sodium (Dihydrate)
C₇H₅NNaO₃S·2H₂O · CAS 6155-57-3 · Sodium saccharin dihydrate, crystalline powder
A sodium saccharin dihydrate for tabletop and cost-sensitive sweetening, specified by assay on the dried basis, moisture and the metallic-tail taste that limits its use.
SW-019 Reviewed 20 November 2026 5 technical documents
- Assay (dried basis)
- 99.0–101.0%
- Minimum order
- 1 kg
- Indicative sweetness
- 300–500 × sucrose
- Indicative lead time
- 1–7 days
Specification
What the certificate will report
| Assay (dried basis) | 99.0–101.0% (HPLC) |
|---|---|
| Appearance | White crystalline powder or granules |
| Moisture | 13.5–15.0% (dihydrate) |
| pH (10% solution) | 5.0–8.0 |
| Solubility | Freely soluble in water |
| Particle size | ≥95% through 80 mesh; granular on request |
| Bulk density | 0.60–0.90 g/mL |
| Benzoate and salicylate | Absent by the specified test |
| Heavy metals | Pb ≤0.5 · As ≤0.5 · Cd ≤0.5 · Hg ≤0.1 mg/kg |
| Microbiology | APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent |
| Chemical formula | C₇H₅NNaO₃S·2H₂O |
| CAS | 6155-57-3 |
| Marker set | Sodium saccharin 99.0–101.0% (dried basis), dihydrate |
| Appearance | White crystalline powder or granules |
| Solubility | Freely soluble in water; the dihydrate loses water on heating and should not be dried before use. |
Primary method HPLC-UV — the full HPLC-UV method guide explains what the figure proves. How the COA is built →
Quick inquiry
Ask about this grade
Name, company, email and the question. The product and the page you are reading travel with it, so there is nothing else to select.
Sweetness and application
What the grade tastes like
| Indicative sweetness | 300–500 × sucrose, indicative |
|---|---|
| Taste note | Fast, intense sweetness with a metallic and bitter linger; rarely used alone in a premium-taste application. |
| Starting use level | 0.005–0.05% in beverages, depending on the blend |
| Blend behaviour | Blended with cyclamate or aspartame to reduce the metallic tail; the blend must be declared. |
Taste is matrix-specific The figures above are a starting point for a bench trial, not a promise of the finished product. How the matrix changes the result →
Indicative profile curated from the published taste note. Confirm it in your matrix.
Sweetness calculator
Enter the target sucrose sweetness to estimate the use level.
Estimate only, based on the published sweetness range and 1 L ≈ 1 kg. The matrix, process and blend decide the final level.
Process fit
Freely soluble in water
Stable in dry form and through normal food processing
Stable across normal food pH
Low
Ordering
Entry quantity, packing and sample
Availability In production and available to order. The batch COA, pack and lead time are confirmed against the order.
Samples are drawn from a released lot and travel with that lot's COA. The pack and the retained sample are recorded on the lot file.
Technical documentation
Five documents, one standard.
Quality and procurement pages for Saccharin Sodium (Dihydrate). Each card opens the full document; a sample COA and the technical data sheet are available on request.





What to confirm before ordering
- Confirm the dihydrate form and the assay on a dried basis.
- Taste at the final dose; the metallic tail is the limiting factor.
- The dihydrate moisture is part of the specification; do not dry it before weighing.
- Confirm assay (dried basis): 99.0–101.0% (HPLC). Check the method and reference standard on the COA.
Buyer questions
Practical answers
What is Saccharin Sodium (Dihydrate) specified to?
Assay (dried basis): 99.0–101.0% (HPLC). The full specification adds Appearance, Moisture, pH (10% solution), Solubility, Particle size and the contaminant panel. Every figure on the batch COA is reported with the method used to produce it.
Which exact high-intensity sweetener is this?
The catalog grade is Sodium saccharin dihydrate, crystalline powder. The salt, the physical form and the related-substance profile are part of the specification; the grade page compares the alternatives and explains what changes in the specification and the process.
Which applications does this grade fit?
Tabletop, Beverages, Confectionery, Oral care, Chewing gum. The grade is selected against the application and the process: solubility and clarity for a beverage, bulk and crystallisation for confectionery, flow and compaction for a tabletop or supplement.
Which documents are supplied with the batch?
A batch-specific COA, TDS, SDS, allergen and GMO statements, an origin record and a residual-solvent statement. Third-party heavy-metal or microbiological reports can be arranged, and the specification comparison is issued before the first order.
What is the minimum order and lead time?
1 kg minimum, packed in a 1 kg foil pouch from a released lot; 25 kg fiber drums are available as quantities scale. 1–7 days after specification and order confirmation. Samples are typically 100–500 g and carry the COA of the lot they were drawn from.
Documentation
Released with every lot
- Batch-specific certificate of analysis against the agreed specification
- Technical data sheet with form, CAS or species, carrier, storage and packing
- Safety data sheet in the 16-section format
- Allergen, GMO and origin statements signed for the batch
- Residual-solvent statement for the purification system
- Specification comparison against the specification you sent
Next step
Send the spec. We will confirm the form.
A competitor COA, a target dose or a matrix brief is enough to start. We reply with the grade we can release, the documents behind it and the questions we still need answered.