Plant-Derived Sweeteners & Sweet Proteins · Specialty

Rebaudioside M 95%

C₅₆H₉₀O₃₃ · CAS 1220616-44-3 · Rebaudioside M, high-purity steviol glycoside

A 95% Rebaudioside M grade for premium beverages that need a faster, cleaner sweetness than Reb A, with the minor glycoside profile stated on the COA.

SW-003 Reviewed 20 November 2026 5 technical documents

Rebaudioside M
≥95.0%
Minimum order
1 kg
Indicative sweetness
250–350 × sucrose
Indicative lead time
3–10 days

Specification

What the certificate will report

Rebaudioside M≥95.0% (HPLC)
Total steviol glycosides≥98.0% (HPLC)
Rebaudioside A≤2.0% (HPLC)
Stevioside≤0.5% (HPLC)
AppearanceWhite to off-white powder
Moisture≤3.0%
pH (1% solution)4.5–7.0
SolubilityFreely soluble in water
Particle size≥95% through 80 mesh
Bulk density0.30–0.60 g/mL
Heavy metalsPb ≤0.5 · As ≤0.5 · Cd ≤0.5 · Hg ≤0.1 mg/kg
MicrobiologyAPC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent
Chemical formulaC₅₆H₉₀O₃₃
CAS1220616-44-3
Marker setReb M ≥95%, total steviol glycosides ≥98%, Reb A ≤2%
AppearanceWhite to off-white, free-flowing powder
SolubilityFreely soluble in water; clear solution at typical beverage use levels.

Primary method HPLC-UV — the full HPLC-UV method guide explains what the figure proves. How the COA is built →

Quick inquiry

Ask about this grade

Name, company, email and the question. The product and the page you are reading travel with it, so there is nothing else to select.

We use your details only to answer this inquiry. Country is detected from your connection and used only for freight and compliance. Need a written quotation instead? The full form asks for quantity, preferred form, destination market and the documents you need — those answers are what turn a reply into a priced quotation instead of another round of questions.

Sweetness and application

What the grade tastes like

Indicative sweetness250–350 × sucrose, indicative
Taste noteFaster onset and cleaner finish than Reb A, with less liquorice linger; still sweet after the swallow at high dose.
Starting use level0.008–0.05% in beverages, depending on the target sucrose equivalence
Blend behaviourWorks with erythritol and allulose; a small monk fruit fraction can add roundness.

Taste is matrix-specific The figures above are a starting point for a bench trial, not a promise of the finished product. How the matrix changes the result →

Onset Medium
Finish Short
Mouthfeel Neutral
Off-note Slight tail at high dose

Indicative profile curated from the published taste note. Confirm it in your matrix.

Sweetness calculator

Enter the target sucrose sweetness to estimate the use level.

Estimated use level0.023–0.032%
Per kg / litre0.23–0.32 g per kg / L

Estimate only, based on the published sweetness range and 1 L ≈ 1 kg. The matrix, process and blend decide the final level.

Process fit

Water

Freely soluble in water

Heat

Stable dry and through standard beverage pasteurisation

pH

Stable across normal beverage pH

Moisture

Moderately hygroscopic

Ordering

Entry quantity, packing and sample

Minimum order1 kg
Indicative lead time3–10 days
Standard pack1 kg foil pouch · 25 kg fiber drum
Sample100–500 g with lot COA

Availability In production and available to order. The batch COA, pack and lead time are confirmed against the order.

Samples are drawn from a released lot and travel with that lot's COA. The pack and the retained sample are recorded on the lot file.

What to confirm before ordering

  • Confirm whether the grade is leaf-extracted or fermentation-derived; the impurity profile differs.
  • Taste at the final pH; the clean finish can change in acid.
  • Reb M costs more per kilogram than Reb A; compare at sucrose equivalence, not at equal weight.
  • Confirm rebaudioside m: ≥95.0% (HPLC). Check the method and reference standard on the COA.

Buyer questions

Practical answers

What is Rebaudioside M 95% specified to?

Rebaudioside M: ≥95.0% (HPLC). The full specification adds Total steviol glycosides, Rebaudioside A, Stevioside, Appearance, Moisture and the contaminant panel. Every figure on the batch COA is reported with the method used to produce it.

Which glycoside or extract marker is this?

The catalog grade is Rebaudioside M, high-purity steviol glycoside. The specification is built around Reb M ≥95%, total steviol glycosides ≥98%, Reb A ≤2%, so a total percentage is not accepted as a substitute for the profile. The grade page explains what changes between the published alternatives.

Which applications does this grade fit?

Premium beverages, Tabletop, Dairy alternatives, Functional drinks, Supplements. The grade is selected against the application and the process: solubility and clarity for a beverage, bulk and crystallisation for confectionery, flow and compaction for a tabletop or supplement.

Which documents are supplied with the batch?

A batch-specific COA, TDS, SDS, allergen and GMO statements, an origin record and a residual-solvent statement. Third-party heavy-metal or microbiological reports can be arranged, and the specification comparison is issued before the first order.

What is the minimum order and lead time?

1 kg minimum, packed in a 1 kg foil pouch from a released lot; 25 kg fiber drums are available as quantities scale. 3–10 days after specification and order confirmation. Samples are typically 100–500 g and carry the COA of the lot they were drawn from.

Documentation

Released with every lot

  • Batch-specific certificate of analysis against the agreed specification
  • Technical data sheet with form, CAS or species, carrier, storage and packing
  • Safety data sheet in the 16-section format
  • Allergen, GMO and origin statements signed for the batch
  • Residual-solvent statement for the purification system
  • Specification comparison against the specification you sent

Next step

Send the spec. We will confirm the form.

A competitor COA, a target dose or a matrix brief is enough to start. We reply with the grade we can release, the documents behind it and the questions we still need answered.