Plant-Derived Sweeteners & Sweet Proteins · Core range
Monk Fruit Extract 50%
Mogroside V and related cucurbitane glycosides · CAS 88901-36-4 (Mogroside V) · Water-extracted monk fruit concentrate, ≥50% Mogroside V
A 50% Mogroside V monk fruit extract for beverages and foods, specified by the mogroside profile and supplied with taste and solubility data.
SW-004 Reviewed 20 November 2026 5 technical documents
- Mogroside V
- ≥50.0%
- Minimum order
- 1 kg
- Indicative sweetness
- 150–250 × sucrose
- Indicative lead time
- 3–10 days
Specification
What the certificate will report
| Mogroside V | ≥50.0% (HPLC) |
|---|---|
| Total mogrosides | ≥60.0% (HPLC) |
| Appearance | Light yellow to off-white powder |
| Moisture | ≤5.0% |
| pH (1% solution) | 4.0–7.0 |
| Solubility | Soluble in water; slight haze at high concentration |
| Particle size | ≥95% through 80 mesh |
| Bulk density | 0.35–0.65 g/mL |
| Heavy metals | Pb ≤0.5 · As ≤0.5 · Cd ≤0.5 · Hg ≤0.1 mg/kg |
| Microbiology | APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent |
| Chemical formula | Mogroside V and related cucurbitane glycosides |
| CAS | 88901-36-4 (Mogroside V) |
| Marker set | Mogroside V ≥50%, total mogrosides ≥60% |
| Appearance | Light yellow to off-white, free-flowing powder |
| Solubility | Soluble in water; a slight haze can appear at high concentration and should be checked in clear beverages. |
Primary method HPLC-UV — the full HPLC-UV method guide explains what the figure proves. How the COA is built →
Quick inquiry
Ask about this grade
Name, company, email and the question. The product and the page you are reading travel with it, so there is nothing else to select.
Sweetness and application
What the grade tastes like
| Indicative sweetness | 150–250 × sucrose, indicative for a 50% Mogroside V extract |
|---|---|
| Taste note | Clean, fruit-forward sweetness with a melon-like note at high dose; less liquorice linger than stevia. |
| Starting use level | 0.01–0.07% in beverages, depending on target sucrose equivalence |
| Blend behaviour | Blends well with stevia, erythritol and allulose; it rounds the stevia tail without adding a licorice note. |
Taste is matrix-specific The figures above are a starting point for a bench trial, not a promise of the finished product. How the matrix changes the result →
Indicative profile curated from the published taste note. Confirm it in your matrix.
Sweetness calculator
Enter the target sucrose sweetness to estimate the use level.
Estimate only, based on the published sweetness range and 1 L ≈ 1 kg. The matrix, process and blend decide the final level.
Process fit
Soluble in water
Stable in dry form and through typical beverage heat treatment
Stable across pH 3–7
Hygroscopic
Ordering
Entry quantity, packing and sample
Availability In production and available to order. The batch COA, pack and lead time are confirmed against the order.
Samples are drawn from a released lot and travel with that lot's COA. The pack and the retained sample are recorded on the lot file.
Technical documentation
Five documents, one standard.
Quality and procurement pages for Monk Fruit Extract 50%. Each card opens the full document; a sample COA and the technical data sheet are available on request.





What to confirm before ordering
- Ask for Mogroside V and total mogrosides separately; a total can hide a weak V fraction.
- Check solution haze and colour at the target dose in a clear beverage.
- Taste at the final dose; the melon note is pleasant at low levels and dominant at high levels.
- Confirm mogroside v: ≥50.0% (HPLC). Check the method and reference standard on the COA.
Buyer questions
Practical answers
What is Monk Fruit Extract 50% specified to?
Mogroside V: ≥50.0% (HPLC). The full specification adds Total mogrosides, Appearance, Moisture, pH (1% solution), Solubility and the contaminant panel. Every figure on the batch COA is reported with the method used to produce it.
Which glycoside or extract marker is this?
The catalog grade is Water-extracted monk fruit concentrate, ≥50% Mogroside V. The specification is built around Mogroside V ≥50%, total mogrosides ≥60%, so a total percentage is not accepted as a substitute for the profile. The grade page explains what changes between the published alternatives.
Which applications does this grade fit?
Beverages, Tabletop, Dairy alternatives, Confectionery, Sauces. The grade is selected against the application and the process: solubility and clarity for a beverage, bulk and crystallisation for confectionery, flow and compaction for a tabletop or supplement.
Which documents are supplied with the batch?
A batch-specific COA, TDS, SDS, allergen and GMO statements, an origin record and a residual-solvent statement. Third-party heavy-metal or microbiological reports can be arranged, and the specification comparison is issued before the first order.
What is the minimum order and lead time?
1 kg minimum, packed in a 1 kg foil pouch from a released lot; 25 kg fiber drums are available as quantities scale. 3–10 days after specification and order confirmation. Samples are typically 100–500 g and carry the COA of the lot they were drawn from.
Documentation
Released with every lot
- Batch-specific certificate of analysis against the agreed specification
- Technical data sheet with form, CAS or species, carrier, storage and packing
- Safety data sheet in the 16-section format
- Allergen, GMO and origin statements signed for the batch
- Residual-solvent statement for the purification system
- Specification comparison against the specification you sent
Next step
Send the spec. We will confirm the form.
A competitor COA, a target dose or a matrix brief is enough to start. We reply with the grade we can release, the documents behind it and the questions we still need answered.