Rare & Functional Sugars · Core range

Crystalline Fructose

C₆H₁₂O₆ · CAS 57-48-7 · D-Fructose, crystalline powder

A 99.5% crystalline fructose for beverages, bakery and confectionery, with a high sweetness, humectancy and browning behaviour stated before the trial.

SW-038 Reviewed 20 November 2026 5 technical documents

Fructose (dry basis)
≥99.5%
Minimum order
1 kg
Indicative sweetness
130–180% of sucrose at equal solids, depending on the matrix
Indicative lead time
3–10 days

Specification

What the certificate will report

Fructose (dry basis)≥99.5% (HPLC-RI)
AppearanceWhite crystalline powder
Moisture≤0.5%
pH (10% solution)4.0–6.5
SolubilityFreely soluble in water
Particle size≥95% through 60 mesh
Bulk density0.55–0.85 g/mL
Other sugars≤0.5% (HPLC-RI)
Heavy metalsPb ≤0.5 · As ≤0.5 · Cd ≤0.5 · Hg ≤0.1 mg/kg
MicrobiologyAPC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent
Chemical formulaC₆H₁₂O₆
CAS57-48-7
Marker setFructose ≥99.5%
AppearanceWhite crystalline powder
SolubilityFreely soluble in water; hygroscopic and humectant.

Primary method HPLC-RI — the full HPLC-RI method guide explains what the figure proves. How the COA is built →

Quick inquiry

Ask about this grade

Name, company, email and the question. The product and the page you are reading travel with it, so there is nothing else to select.

We use your details only to answer this inquiry. Country is detected from your connection and used only for freight and compliance. Need a written quotation instead? The full form asks for quantity, preferred form, destination market and the documents you need — those answers are what turn a reply into a priced quotation instead of another round of questions.

Sweetness and application

What the grade tastes like

Indicative sweetness130–180% of sucrose at equal solids, depending on the matrix
Taste noteClean, fast-onset sweetness with a strong body; at high dose it can taste syrupy.
Starting use level2–15% in beverages, bakery and confectionery, depending on the sugar replacement
Blend behaviourBlends with glucose, sucrose and high-intensity sweeteners; it adds humectancy and browning.

Taste is matrix-specific The figures above are a starting point for a bench trial, not a promise of the finished product. How the matrix changes the result →

Onset Fast
Finish Medium
Mouthfeel Neutral
Off-note Syrupy at high dose

Indicative profile curated from the published taste note. Confirm it in your matrix.

Sweetness calculator

Enter the target sucrose sweetness to estimate the use level.

Estimated use level4.44–6.15%
Per kg / litre44.44–61.54 g per kg / L

Estimate only, based on the published sweetness range and 1 L ≈ 1 kg. The matrix, process and blend decide the final level.

Process fit

Water

Freely soluble in water

Heat

Browns readily at high heat

pH

Stable across normal food pH

Moisture

Hygroscopic

Ordering

Entry quantity, packing and sample

Minimum order1 kg
Indicative lead time3–10 days
Standard pack1 kg foil pouch · 25 kg fiber drum
Sample100–500 g with lot COA

Availability In production and available to order. The batch COA, pack and lead time are confirmed against the order.

Samples are drawn from a released lot and travel with that lot's COA. The pack and the retained sample are recorded on the lot file.

What to confirm before ordering

  • Confirm the crystalline form and the other-sugar profile.
  • Check hygroscopicity and browning in the process.
  • Confirm the exact identity, carrier and particle size for Crystalline Fructose before the first order.
  • Taste at the target sucrose equivalence in the real matrix, not in water alone.

Buyer questions

Practical answers

What is Crystalline Fructose specified to?

Fructose (dry basis): ≥99.5% (HPLC-RI). The full specification adds Appearance, Moisture, pH (10% solution), Solubility, Particle size and the contaminant panel. Every figure on the batch COA is reported with the method used to produce it.

Which rare sugar and hydrate is this?

The catalog grade is D-Fructose, crystalline powder. The hydrate or anomer and the other-sugar profile are part of the specification. The grade page compares the forms and states what changes in the specification and the process.

Which applications does this grade fit?

Beverages, Bakery, Confectionery, Dairy, Tabletop. The grade is selected against the application and the process: solubility and clarity for a beverage, bulk and crystallisation for confectionery, flow and compaction for a tabletop or supplement.

Which documents are supplied with the batch?

A batch-specific COA, TDS, SDS, allergen and GMO statements, an origin record and a residual-solvent statement. Third-party heavy-metal or microbiological reports can be arranged, and the specification comparison is issued before the first order.

What is the minimum order and lead time?

1 kg minimum, packed in a 1 kg foil pouch from a released lot; 25 kg fiber drums are available as quantities scale. 3–10 days after specification and order confirmation. Samples are typically 100–500 g and carry the COA of the lot they were drawn from.

Documentation

Released with every lot

  • Batch-specific certificate of analysis against the agreed specification
  • Technical data sheet with form, CAS or species, carrier, storage and packing
  • Safety data sheet in the 16-section format
  • Allergen, GMO and origin statements signed for the batch
  • Residual-solvent statement for the purification system
  • Specification comparison against the specification you sent

Next step

Send the spec. We will confirm the form.

A competitor COA, a target dose or a matrix brief is enough to start. We reply with the grade we can release, the documents behind it and the questions we still need answered.