Rare & Functional Sugars · Specialty
L-Arabinose
C₅H₁₀O₅ · CAS 5328-37-0 · L-Arabinose, crystalline powder
An L-arabinose for sweetness modification and reduced-sugar systems, specified by assay, other sugars and the low sweetness that makes it a modifier rather than a bulk sugar.
SW-035 Reviewed 20 November 2026 5 technical documents
- Assay (dried basis)
- 98.0–101.0%
- Minimum order
- 1 kg
- Indicative sweetness
- 40–50% of sucrose
- Indicative lead time
- 3–10 days
Specification
What the certificate will report
| Assay (dried basis) | 98.0–101.0% (HPLC-RI) |
|---|---|
| Appearance | White crystalline powder |
| Moisture | ≤0.5% |
| pH (5% solution) | 4.0–7.0 |
| Solubility | Freely soluble in water |
| Particle size | ≥95% through 60 mesh |
| Bulk density | 0.50–0.80 g/mL |
| Other sugars | ≤1.0% (HPLC) |
| Heavy metals | Pb ≤0.5 · As ≤0.5 · Cd ≤0.5 · Hg ≤0.1 mg/kg |
| Microbiology | APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent |
| Chemical formula | C₅H₁₀O₅ |
| CAS | 5328-37-0 |
| Marker set | L-Arabinose 98.0–101.0%, other sugars ≤1.0% |
| Appearance | White crystalline powder |
| Solubility | Freely soluble in water; clean solutions at use levels. |
Primary method HPLC-RI — the full HPLC-RI method guide explains what the figure proves. How the COA is built →
Quick inquiry
Ask about this grade
Name, company, email and the question. The product and the page you are reading travel with it, so there is nothing else to select.
Sweetness and application
What the grade tastes like
| Indicative sweetness | 40–50% of sucrose, indicative |
|---|---|
| Taste note | Mild, clean sweetness with a slight cooling effect; used at low levels as a sweetness modifier rather than a bulk sweetener. |
| Starting use level | 0.5–5% in beverages and food, depending on the function |
| Blend behaviour | Used with sucrose or high-intensity sweeteners to modify the sweetness profile and reduce the sugar load. |
Taste is matrix-specific The figures above are a starting point for a bench trial, not a promise of the finished product. How the matrix changes the result →
Indicative profile curated from the published taste note. Confirm it in your matrix.
Sweetness calculator
Enter the target sucrose sweetness to estimate the use level.
Estimate only, based on the published sweetness range and 1 L ≈ 1 kg. The matrix, process and blend decide the final level.
Process fit
Freely soluble in water
Stable in dry form and through normal food processing
Stable across normal food pH
Moderate
Ordering
Entry quantity, packing and sample
Availability In production and available to order. The batch COA, pack and lead time are confirmed against the order.
Samples are drawn from a released lot and travel with that lot's COA. The pack and the retained sample are recorded on the lot file.
Technical documentation
Five documents, one standard.
Quality and procurement pages for L-Arabinose. Each card opens the full document; a sample COA and the technical data sheet are available on request.





What to confirm before ordering
- Confirm the L enantiomer and the optical rotation.
- Taste at low dose; the modifier effect is matrix-specific.
- L-Arabinose is not a 1:1 sugar replacement; calculate the sweetness.
- Confirm assay (dried basis): 98.0–101.0% (HPLC-RI). Check the method and reference standard on the COA.
Buyer questions
Practical answers
What is L-Arabinose specified to?
Assay (dried basis): 98.0–101.0% (HPLC-RI). The full specification adds Appearance, Moisture, pH (5% solution), Solubility, Particle size and the contaminant panel. Every figure on the batch COA is reported with the method used to produce it.
Which rare sugar and hydrate is this?
The catalog grade is L-Arabinose, crystalline powder. The hydrate or anomer and the other-sugar profile are part of the specification. The grade page compares the forms and states what changes in the specification and the process.
Which applications does this grade fit?
Beverages, Confectionery, Bakery, Tabletop, Sauces. The grade is selected against the application and the process: solubility and clarity for a beverage, bulk and crystallisation for confectionery, flow and compaction for a tabletop or supplement.
Which documents are supplied with the batch?
A batch-specific COA, TDS, SDS, allergen and GMO statements, an origin record and a residual-solvent statement. Third-party heavy-metal or microbiological reports can be arranged, and the specification comparison is issued before the first order.
What is the minimum order and lead time?
1 kg minimum, packed in a 1 kg foil pouch from a released lot; 25 kg fiber drums are available as quantities scale. 3–10 days after specification and order confirmation. Samples are typically 100–500 g and carry the COA of the lot they were drawn from.
Documentation
Released with every lot
- Batch-specific certificate of analysis against the agreed specification
- Technical data sheet with form, CAS or species, carrier, storage and packing
- Safety data sheet in the 16-section format
- Allergen, GMO and origin statements signed for the batch
- Residual-solvent statement for the purification system
- Specification comparison against the specification you sent
Next step
Send the spec. We will confirm the form.
A competitor COA, a target dose or a matrix brief is enough to start. We reply with the grade we can release, the documents behind it and the questions we still need answered.