Soluble Fibres & Prebiotic Carbohydrates · Specialty

Lactulose 70% Syrup

C₁₂H₂₂O₁₁ · CAS 4618-18-2 · Lactulose 70% syrup

A lactulose 70% syrup for food and specialty carbohydrate use, with the solids, sugar profile and viscosity stated.

SW-052 Reviewed 20 November 2026 5 technical documents

Lactulose (dry basis)
≥70.0%
Minimum order
1 kg
Indicative sweetness
30–50% of sucrose
Indicative lead time
3–10 days

Specification

What the certificate will report

Lactulose (dry basis)≥70.0% (HPLC-RI)
Solids70.0–75.0% (refractometer)
AppearanceColourless to light yellow syrup
pH (10% solution)3.0–5.0
Ash≤0.1%
SolubilityMiscible with water
ViscositySpecified at 25 °C
Other sugars≤5.0% (HPLC-RI)
Heavy metalsPb ≤0.5 · As ≤0.5 · Cd ≤0.5 · Hg ≤0.1 mg/kg
MicrobiologyAPC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent
Chemical formulaC₁₂H₂₂O₁₁
CAS4618-18-2
Marker setLactulose ≥70%, solids 70–75%
AppearanceColourless to light yellow syrup
SolubilityMiscible with water; supplied as a syrup.

Primary method HPLC-RI — the full HPLC-RI method guide explains what the figure proves. How the COA is built →

Quick inquiry

Ask about this grade

Name, company, email and the question. The product and the page you are reading travel with it, so there is nothing else to select.

We use your details only to answer this inquiry. Country is detected from your connection and used only for freight and compliance. Need a written quotation instead? The full form asks for quantity, preferred form, destination market and the documents you need — those answers are what turn a reply into a priced quotation instead of another round of questions.

Sweetness and application

What the grade tastes like

Indicative sweetness30–50% of sucrose, indicative
Taste noteMild sweetness with body; at higher doses a slight caramel note.
Starting use level1–10% in food and specialty carbohydrate systems, depending on the application
Blend behaviourBlends with other syrups and fibres; the water and solids are part of the formula.

Taste is matrix-specific The figures above are a starting point for a bench trial, not a promise of the finished product. How the matrix changes the result →

Onset Medium
Finish Medium
Mouthfeel Neutral
Off-note Mild; slight caramel note

Indicative profile curated from the published taste note. Confirm it in your matrix.

Sweetness calculator

Enter the target sucrose sweetness to estimate the use level.

Estimated use level16.00–26.67%
Per kg / litre160.00–266.67 g per kg / L

Estimate only, based on the published sweetness range and 1 L ≈ 1 kg. The matrix, process and blend decide the final level.

Process fit

Water

Miscible with water

Heat

Stable in normal processing

pH

Stable at mildly acidic pH

Moisture

The syrup contains water

Ordering

Entry quantity, packing and sample

Minimum order1 kg
Indicative lead time3–10 days
Standard pack1 kg foil pouch · 25 kg fiber drum
Sample100–500 g with lot COA

Availability In production and available to order. The batch COA, pack and lead time are confirmed against the order.

Available forms Syrup 70%Powder on request

Samples are drawn from a released lot and travel with that lot's COA. The pack and the retained sample are recorded on the lot file.

What to confirm before ordering

  • Confirm the solids and the lactulose/sugar profile.
  • Check colour and sweetness after the heat step.
  • Confirm the exact identity, carrier and particle size for Lactulose 70% Syrup before the first order.
  • Taste at the target sucrose equivalence in the real matrix, not in water alone.

Buyer questions

Practical answers

What is Lactulose 70% Syrup specified to?

Lactulose (dry basis): ≥70.0% (HPLC-RI). The full specification adds Solids, Appearance, pH (10% solution), Ash, Solubility and the contaminant panel. Every figure on the batch COA is reported with the method used to produce it.

Which fibre method and DP profile is this?

The catalog grade is Lactulose 70% syrup. The fibre figure is method-specific, and the degree of polymerisation decides the viscosity, solubility and sweetness. The grade page sets out the analytical basis and the forms.

Which applications does this grade fit?

Specialty foods, Supplements, Confectionery, Dairy, Beverages. The grade is selected against the application and the process: solubility and clarity for a beverage, bulk and crystallisation for confectionery, flow and compaction for a tabletop or supplement.

Which documents are supplied with the batch?

A batch-specific COA, TDS, SDS, allergen and GMO statements, an origin record and a residual-solvent statement. Third-party heavy-metal or microbiological reports can be arranged, and the specification comparison is issued before the first order.

What is the minimum order and lead time?

1 kg minimum, packed in a 1 kg foil pouch from a released lot; 25 kg fiber drums are available as quantities scale. 3–10 days after specification and order confirmation. Samples are typically 100–500 g and carry the COA of the lot they were drawn from.

Documentation

Released with every lot

  • Batch-specific certificate of analysis against the agreed specification
  • Technical data sheet with form, CAS or species, carrier, storage and packing
  • Safety data sheet in the 16-section format
  • Allergen, GMO and origin statements signed for the batch
  • Residual-solvent statement for the purification system
  • Specification comparison against the specification you sent

Next step

Send the spec. We will confirm the form.

A competitor COA, a target dose or a matrix brief is enough to start. We reply with the grade we can release, the documents behind it and the questions we still need answered.