Soluble Fibres & Prebiotic Carbohydrates · Core range

Partially Hydrolyzed Guar Gum (PHGG)

Partially hydrolysed guar galactomannan · CAS 9000-30-0 (guar gum basis) · Partially hydrolysed guar gum, spray-dried powder

A partially hydrolyzed guar gum for soluble fibre without viscosity, with the fibre method, DP profile and low-viscosity behaviour stated.

SW-049 Reviewed 20 November 2026 5 technical documents

Dietary fibre
≥85.0%
Minimum order
1 kg
Indicative sweetness
<5% of sucrose; essentially non-sweet
Indicative lead time
3–10 days

Specification

What the certificate will report

Dietary fibre≥85.0% (AOAC 2009.01)
AppearanceWhite to off-white powder
Moisture≤6.0%
pH (1% solution)4.0–7.0
SolubilitySoluble in water; low viscosity
Particle size≥95% through 80 mesh
Ash≤1.0%
ViscosityLow; specified for the grade
Heavy metalsPb ≤0.5 · As ≤0.5 · Cd ≤0.5 · Hg ≤0.1 mg/kg
MicrobiologyAPC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent
Chemical formulaPartially hydrolysed guar galactomannan
CAS9000-30-0 (guar gum basis)
Marker setPHGG fibre ≥85%, low viscosity
AppearanceWhite to off-white powder
SolubilitySoluble in water; low viscosity compared with native guar gum.

Primary method HPLC-RI — the full HPLC-RI method guide explains what the figure proves. How the COA is built →

Quick inquiry

Ask about this grade

Name, company, email and the question. The product and the page you are reading travel with it, so there is nothing else to select.

We use your details only to answer this inquiry. Country is detected from your connection and used only for freight and compliance. Need a written quotation instead? The full form asks for quantity, preferred form, destination market and the documents you need — those answers are what turn a reply into a priced quotation instead of another round of questions.

Sweetness and application

What the grade tastes like

Indicative sweetness<5% of sucrose; essentially non-sweet
Taste noteClean, almost neutral; useful where the fibre must not change the flavour or the viscosity.
Starting use level2–10% in beverages and foods, depending on the fibre target
Blend behaviourBlends with inulin, FOS and polyols; adds fibre without viscosity.

Taste is matrix-specific The figures above are a starting point for a bench trial, not a promise of the finished product. How the matrix changes the result →

Onset Slow
Finish Short
Mouthfeel Neutral
Off-note Clean; not sweet

Indicative profile curated from the published taste note. Confirm it in your matrix.

Process fit

Water

Soluble in water

Heat

Stable in dry form

pH

Stable across normal food pH

Moisture

Hygroscopic

Ordering

Entry quantity, packing and sample

Minimum order1 kg
Indicative lead time3–10 days
Standard pack1 kg foil pouch · 25 kg fiber drum
Sample100–500 g with lot COA

Availability In production and available to order. The batch COA, pack and lead time are confirmed against the order.

Samples are drawn from a released lot and travel with that lot's COA. The pack and the retained sample are recorded on the lot file.

What to confirm before ordering

  • Confirm the fibre method, viscosity and guar source.
  • Check dispersion and mouthfeel at the target dose.
  • Confirm the exact identity, carrier and particle size for Partially Hydrolyzed Guar Gum (PHGG) before the first order.
  • Taste at the target sucrose equivalence in the real matrix, not in water alone.

Buyer questions

Practical answers

What is Partially Hydrolyzed Guar Gum (PHGG) specified to?

Dietary fibre: ≥85.0% (AOAC 2009.01). The full specification adds Appearance, Moisture, pH (1% solution), Solubility, Particle size and the contaminant panel. Every figure on the batch COA is reported with the method used to produce it.

Which fibre method and DP profile is this?

The catalog grade is Partially hydrolysed guar gum, spray-dried powder. The fibre figure is method-specific, and the degree of polymerisation decides the viscosity, solubility and sweetness. The grade page sets out the analytical basis and the forms.

Which applications does this grade fit?

Beverages, Dairy, Supplements, Bakery, Confectionery. The grade is selected against the application and the process: solubility and clarity for a beverage, bulk and crystallisation for confectionery, flow and compaction for a tabletop or supplement.

Which documents are supplied with the batch?

A batch-specific COA, TDS, SDS, allergen and GMO statements, an origin record and a residual-solvent statement. Third-party heavy-metal or microbiological reports can be arranged, and the specification comparison is issued before the first order.

What is the minimum order and lead time?

1 kg minimum, packed in a 1 kg foil pouch from a released lot; 25 kg fiber drums are available as quantities scale. 3–10 days after specification and order confirmation. Samples are typically 100–500 g and carry the COA of the lot they were drawn from.

Documentation

Released with every lot

  • Batch-specific certificate of analysis against the agreed specification
  • Technical data sheet with form, CAS or species, carrier, storage and packing
  • Safety data sheet in the 16-section format
  • Allergen, GMO and origin statements signed for the batch
  • Residual-solvent statement for the purification system
  • Specification comparison against the specification you sent

Next step

Send the spec. We will confirm the form.

A competitor COA, a target dose or a matrix brief is enough to start. We reply with the grade we can release, the documents behind it and the questions we still need answered.