Plant-Derived Sweeteners & Sweet Proteins · Specialty

Brazzein 90%

Brazzein sweet protein · CAS — · Brazzein protein, 90% on a protein basis

A 90% brazzein sweet protein for high-intensity sweetness, with the carrier, protein identity and handling requirements stated up front.

SW-013 Reviewed 20 November 2026 5 technical documents

Brazzein protein
≥90.0%
Minimum order
1 kg
Indicative sweetness
1,000–2,000 × sucrose
Indicative lead time
3–10 days

Specification

What the certificate will report

Brazzein protein≥90.0% (protein basis)
AppearanceWhite to off-white powder
Moisture≤8.0%
pH (1% solution)4.5–7.0
SolubilitySoluble in water
Particle size≥95% through 100 mesh
Bulk density0.25–0.55 g/mL
Ash≤3.0%
Heavy metalsPb ≤0.5 · As ≤0.5 · Cd ≤0.5 · Hg ≤0.1 mg/kg
MicrobiologyAPC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent
Chemical formulaBrazzein sweet protein
CAS—
Marker setBrazzein protein ≥90%, SDS-PAGE identity
AppearanceWhite to off-white powder
SolubilitySoluble in water; a protein solution needs a pH and preservation strategy.

Primary method HPLC-UV — the full HPLC-UV method guide explains what the figure proves. How the COA is built →

Quick inquiry

Ask about this grade

Name, company, email and the question. The product and the page you are reading travel with it, so there is nothing else to select.

We use your details only to answer this inquiry. Country is detected from your connection and used only for freight and compliance. Need a written quotation instead? The full form asks for quantity, preferred form, destination market and the documents you need — those answers are what turn a reply into a priced quotation instead of another round of questions.

Sweetness and application

What the grade tastes like

Indicative sweetness1,000–2,000 × sucrose, indicative for the 90% protein
Taste noteClean, fast-onset sweetness with a long tail; at high dose a slight protein note can appear.
Starting use level0.0005–0.005% in food, depending on the category and the blend
Blend behaviourBlends with stevia, monk fruit and polyols; the protein can add mouthfeel.

Taste is matrix-specific The figures above are a starting point for a bench trial, not a promise of the finished product. How the matrix changes the result →

Onset Fast
Finish Long
Mouthfeel Neutral
Off-note Protein note at high dose

Indicative profile curated from the published taste note. Confirm it in your matrix.

Sweetness calculator

Enter the target sucrose sweetness to estimate the use level.

Estimated use level0.0040–0.0080%
Per kg / litre0.040–0.080 g per kg / L

Estimate only, based on the published sweetness range and 1 L ≈ 1 kg. The matrix, process and blend decide the final level.

Process fit

Water

Soluble in water

Heat

A protein: high heat can unfold it

pH

Most stable at mildly acidic to neutral pH

Moisture

Hygroscopic

Ordering

Entry quantity, packing and sample

Minimum order1 kg
Indicative lead time3–10 days
Standard pack1 kg foil pouch · 25 kg fiber drum
Sample100–500 g with lot COA

Availability In production and available to order. The batch COA, pack and lead time are confirmed against the order.

Samples are drawn from a released lot and travel with that lot's COA. The pack and the retained sample are recorded on the lot file.

What to confirm before ordering

  • Ask for protein content and the carrier; a 10% premix is not a 90% protein.
  • Add after high heat or validate the protein activity through the process.
  • Confirm the exact identity, carrier and particle size for Brazzein 90% before the first order.
  • Taste at the target sucrose equivalence in the real matrix, not in water alone.

Buyer questions

Practical answers

What is Brazzein 90% specified to?

Brazzein protein: ≥90.0% (protein basis). The full specification adds Appearance, Moisture, pH (1% solution), Solubility, Particle size and the contaminant panel. Every figure on the batch COA is reported with the method used to produce it.

Which glycoside or extract marker is this?

The catalog grade is Brazzein protein, 90% on a protein basis. The specification is built around Brazzein protein ≥90%, SDS-PAGE identity, so a total percentage is not accepted as a substitute for the profile. The grade page explains what changes between the published alternatives.

Which applications does this grade fit?

Beverages, Dairy alternatives, Confectionery, Tabletop, Supplements. The grade is selected against the application and the process: solubility and clarity for a beverage, bulk and crystallisation for confectionery, flow and compaction for a tabletop or supplement.

Which documents are supplied with the batch?

A batch-specific COA, TDS, SDS, allergen and GMO statements, an origin record and a residual-solvent statement. Third-party heavy-metal or microbiological reports can be arranged, and the specification comparison is issued before the first order.

What is the minimum order and lead time?

1 kg minimum, packed in a 1 kg foil pouch from a released lot; 25 kg fiber drums are available as quantities scale. 3–10 days after specification and order confirmation. Samples are typically 100–500 g and carry the COA of the lot they were drawn from.

Documentation

Released with every lot

  • Batch-specific certificate of analysis against the agreed specification
  • Technical data sheet with form, CAS or species, carrier, storage and packing
  • Safety data sheet in the 16-section format
  • Allergen, GMO and origin statements signed for the batch
  • Residual-solvent statement for the purification system
  • Specification comparison against the specification you sent

Next step

Send the spec. We will confirm the form.

A competitor COA, a target dose or a matrix brief is enough to start. We reply with the grade we can release, the documents behind it and the questions we still need answered.