Plant-Derived Sweeteners & Sweet Proteins · Specialty
Monellin 90%
Monellin sweet protein · CAS — · Monellin protein, 90% on a protein basis
A 90% monellin sweet protein for high-intensity sweetness, with the protein identity and handling requirements stated before the trial.
SW-014 Reviewed 20 November 2026 5 technical documents
- Monellin protein
- ≥90.0%
- Minimum order
- 1 kg
- Indicative sweetness
- 2,000–3,000 × sucrose
- Indicative lead time
- 3–10 days
Specification
What the certificate will report
| Monellin protein | ≥90.0% (protein basis) |
|---|---|
| Appearance | White to off-white powder |
| Moisture | ≤8.0% |
| pH (1% solution) | 4.5–7.0 |
| Solubility | Soluble in water |
| Particle size | ≥95% through 100 mesh |
| Bulk density | 0.25–0.55 g/mL |
| Ash | ≤3.0% |
| Heavy metals | Pb ≤0.5 · As ≤0.5 · Cd ≤0.5 · Hg ≤0.1 mg/kg |
| Microbiology | APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent |
| Chemical formula | Monellin sweet protein |
| CAS | — |
| Marker set | Monellin protein ≥90%, SDS-PAGE identity |
| Appearance | White to off-white powder |
| Solubility | Soluble in water; a protein solution needs a pH and preservation strategy. |
Primary method HPLC-UV — the full HPLC-UV method guide explains what the figure proves. How the COA is built →
Quick inquiry
Ask about this grade
Name, company, email and the question. The product and the page you are reading travel with it, so there is nothing else to select.
Sweetness and application
What the grade tastes like
| Indicative sweetness | 2,000–3,000 × sucrose, indicative for the 90% protein |
|---|---|
| Taste note | Intense sweetness with a slow onset and a long tail; the protein can add body. |
| Starting use level | 0.0003–0.003% in food, depending on the category and the blend |
| Blend behaviour | Blends with stevia and monk fruit; the tail is long, so a small fraction can change the blend. |
Taste is matrix-specific The figures above are a starting point for a bench trial, not a promise of the finished product. How the matrix changes the result →
Indicative profile curated from the published taste note. Confirm it in your matrix.
Sweetness calculator
Enter the target sucrose sweetness to estimate the use level.
Estimate only, based on the published sweetness range and 1 L ≈ 1 kg. The matrix, process and blend decide the final level.
Process fit
Soluble in water
A protein: high heat can unfold it
Most stable at mildly acidic to neutral pH
Hygroscopic
Ordering
Entry quantity, packing and sample
Availability In production and available to order. The batch COA, pack and lead time are confirmed against the order.
Samples are drawn from a released lot and travel with that lot's COA. The pack and the retained sample are recorded on the lot file.
Technical documentation
Five documents, one standard.
Quality and procurement pages for Monellin 90%. Each card opens the full document; a sample COA and the technical data sheet are available on request.





What to confirm before ordering
- Ask for the protein content and the reference standard used for identity.
- Test the tail at low dose; the protein body changes the blend.
- Confirm the exact identity, carrier and particle size for Monellin 90% before the first order.
- Taste at the target sucrose equivalence in the real matrix, not in water alone.
Buyer questions
Practical answers
What is Monellin 90% specified to?
Monellin protein: ≥90.0% (protein basis). The full specification adds Appearance, Moisture, pH (1% solution), Solubility, Particle size and the contaminant panel. Every figure on the batch COA is reported with the method used to produce it.
Which glycoside or extract marker is this?
The catalog grade is Monellin protein, 90% on a protein basis. The specification is built around Monellin protein ≥90%, SDS-PAGE identity, so a total percentage is not accepted as a substitute for the profile. The grade page explains what changes between the published alternatives.
Which applications does this grade fit?
Beverages, Dairy alternatives, Confectionery, Tabletop, Supplements. The grade is selected against the application and the process: solubility and clarity for a beverage, bulk and crystallisation for confectionery, flow and compaction for a tabletop or supplement.
Which documents are supplied with the batch?
A batch-specific COA, TDS, SDS, allergen and GMO statements, an origin record and a residual-solvent statement. Third-party heavy-metal or microbiological reports can be arranged, and the specification comparison is issued before the first order.
What is the minimum order and lead time?
1 kg minimum, packed in a 1 kg foil pouch from a released lot; 25 kg fiber drums are available as quantities scale. 3–10 days after specification and order confirmation. Samples are typically 100–500 g and carry the COA of the lot they were drawn from.
Documentation
Released with every lot
- Batch-specific certificate of analysis against the agreed specification
- Technical data sheet with form, CAS or species, carrier, storage and packing
- Safety data sheet in the 16-section format
- Allergen, GMO and origin statements signed for the batch
- Residual-solvent statement for the purification system
- Specification comparison against the specification you sent
Next step
Send the spec. We will confirm the form.
A competitor COA, a target dose or a matrix brief is enough to start. We reply with the grade we can release, the documents behind it and the questions we still need answered.