Plant-Derived Sweeteners & Sweet Proteins · Specialty

Monk Fruit Powder 10%

Siraitia grosvenorii fruit powder, 10% mogrosides · CAS — · Spray-dried monk fruit powder, 10% total mogrosides

A spray-dried monk fruit powder with 10% total mogrosides for food and beverage colour, body and mild sweetness, positioned separately from the 50% high-intensity extract.

SW-015 Reviewed 20 November 2026 5 technical documents

Total mogrosides
≥10.0%
Minimum order
1 kg
Indicative sweetness
10–20 × sucrose
Indicative lead time
3–10 days

Specification

What the certificate will report

Total mogrosides≥10.0% (HPLC)
Mogroside V≥6.0% (HPLC)
AppearanceLight yellow to light brown powder
Moisture≤5.0%
pH (1% solution)4.0–7.0
SolubilitySoluble or dispersible in water; some fruit solids may haze
Particle size≥95% through 80 mesh
Bulk density0.35–0.65 g/mL
Heavy metalsPb ≤0.5 · As ≤0.5 · Cd ≤0.5 · Hg ≤0.1 mg/kg
MicrobiologyAPC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent
Chemical formulaSiraitia grosvenorii fruit powder, 10% mogrosides
CAS—
Marker setTotal mogrosides ≥10%, Mogroside V ≥6%
AppearanceLight yellow to light brown powder
SolubilitySoluble or dispersible in water; fruit solids can haze a clear beverage.

Primary method HPLC-UV — the full HPLC-UV method guide explains what the figure proves. How the COA is built →

Quick inquiry

Ask about this grade

Name, company, email and the question. The product and the page you are reading travel with it, so there is nothing else to select.

We use your details only to answer this inquiry. Country is detected from your connection and used only for freight and compliance. Need a written quotation instead? The full form asks for quantity, preferred form, destination market and the documents you need — those answers are what turn a reply into a priced quotation instead of another round of questions.

Sweetness and application

What the grade tastes like

Indicative sweetness10–20 × sucrose, indicative
Taste noteMild, fruit-forward sweetness with a melon note; more colour and body than the high-purity extract.
Starting use level0.05–0.5% in beverages and foods, depending on the sweetness and body target
Blend behaviourBlends with stevia and erythritol; adds body and a fruit note that the extract does not.

Taste is matrix-specific The figures above are a starting point for a bench trial, not a promise of the finished product. How the matrix changes the result →

Onset Medium
Finish Medium
Mouthfeel Neutral
Off-note Fruit and melon notes; colour

Indicative profile curated from the published taste note. Confirm it in your matrix.

Sweetness calculator

Enter the target sucrose sweetness to estimate the use level.

Estimated use level0.40–0.80%
Per kg / litre4.00–8.00 g per kg / L

Estimate only, based on the published sweetness range and 1 L ≈ 1 kg. The matrix, process and blend decide the final level.

Process fit

Water

Soluble or dispersible in water

Heat

Stable in dry form

pH

Stable across normal food pH

Moisture

Hygroscopic

Ordering

Entry quantity, packing and sample

Minimum order1 kg
Indicative lead time3–10 days
Standard pack1 kg foil pouch · 25 kg fiber drum
Sample100–500 g with lot COA

Availability In production and available to order. The batch COA, pack and lead time are confirmed against the order.

Samples are drawn from a released lot and travel with that lot's COA. The pack and the retained sample are recorded on the lot file.

What to confirm before ordering

  • Separate the fruit powder from the 50% extract; the mogroside load is different.
  • Check colour, fruit solids and haze in the final beverage.
  • Confirm the exact identity, carrier and particle size for Monk Fruit Powder 10% before the first order.
  • Taste at the target sucrose equivalence in the real matrix, not in water alone.

Buyer questions

Practical answers

What is Monk Fruit Powder 10% specified to?

Total mogrosides: ≥10.0% (HPLC). The full specification adds Mogroside V, Appearance, Moisture, pH (1% solution), Solubility and the contaminant panel. Every figure on the batch COA is reported with the method used to produce it.

Which glycoside or extract marker is this?

The catalog grade is Spray-dried monk fruit powder, 10% total mogrosides. The specification is built around Total mogrosides ≥10%, Mogroside V ≥6%, so a total percentage is not accepted as a substitute for the profile. The grade page explains what changes between the published alternatives.

Which applications does this grade fit?

Beverages, Dairy alternatives, Bakery, Confectionery, Supplements. The grade is selected against the application and the process: solubility and clarity for a beverage, bulk and crystallisation for confectionery, flow and compaction for a tabletop or supplement.

Which documents are supplied with the batch?

A batch-specific COA, TDS, SDS, allergen and GMO statements, an origin record and a residual-solvent statement. Third-party heavy-metal or microbiological reports can be arranged, and the specification comparison is issued before the first order.

What is the minimum order and lead time?

1 kg minimum, packed in a 1 kg foil pouch from a released lot; 25 kg fiber drums are available as quantities scale. 3–10 days after specification and order confirmation. Samples are typically 100–500 g and carry the COA of the lot they were drawn from.

Documentation

Released with every lot

  • Batch-specific certificate of analysis against the agreed specification
  • Technical data sheet with form, CAS or species, carrier, storage and packing
  • Safety data sheet in the 16-section format
  • Allergen, GMO and origin statements signed for the batch
  • Residual-solvent statement for the purification system
  • Specification comparison against the specification you sent

Next step

Send the spec. We will confirm the form.

A competitor COA, a target dose or a matrix brief is enough to start. We reply with the grade we can release, the documents behind it and the questions we still need answered.