Plant-Derived Sweeteners & Sweet Proteins · Specialty
Naringin Dihydrochalcone (NDC) 98%
C₂₇H₃₄O₁₄ · CAS 18916-17-1 · Naringin dihydrochalcone, hydrogenated citrus flavonoid
A 98% naringin dihydrochalcone (NDC) powder used at very low levels to build sweetness and modify bitterness, with its long linger and cooling note documented before application trials.
SW-006 Reviewed 20 November 2026 5 technical documents
- Naringin dihydrochalcone
- ≥98.0%
- Minimum order
- 1 kg
- Indicative sweetness
- 1,000–2,000 × sucrose
- Indicative lead time
- 3–10 days
Specification
What the certificate will report
| Naringin dihydrochalcone | ≥98.0% (HPLC) |
|---|---|
| Naringin | ≤1.0% (HPLC) |
| Appearance | White to off-white powder |
| Moisture | ≤5.0% |
| pH (1% solution) | 5.0–7.0 |
| Solubility | Slightly soluble in water; soluble in ethanol |
| Particle size | ≥95% through 80 mesh |
| Bulk density | 0.35–0.65 g/mL |
| Heavy metals | Pb ≤0.5 · As ≤0.5 · Cd ≤0.5 · Hg ≤0.1 mg/kg |
| Microbiology | APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent |
| Chemical formula | C₂₇H₃₄O₁₄ |
| CAS | 18916-17-1 |
| Marker set | NDC ≥98%, naringin ≤1% |
| Appearance | White to off-white, free-flowing powder |
| Solubility | Slightly soluble in water; a co-solvent or a diluted pre-mix is usually needed in beverages. |
Primary method HPLC-UV — the full HPLC-UV method guide explains what the figure proves. How the COA is built →
Quick inquiry
Ask about this grade
Name, company, email and the question. The product and the page you are reading travel with it, so there is nothing else to select.
Sweetness and application
What the grade tastes like
| Indicative sweetness | 1,000–2,000 × sucrose, indicative |
|---|---|
| Taste note | Very intense sweetness with a slow onset, a long lingering tail and a cooling, slightly menthol-like note at higher doses. |
| Starting use level | 0.0005–0.005% in food, depending on the category and the blend |
| Blend behaviour | Used at trace levels with other high-intensity sweeteners to extend sweetness and modify bitterness. |
Taste is matrix-specific The figures above are a starting point for a bench trial, not a promise of the finished product. How the matrix changes the result →
Indicative profile curated from the published taste note. Confirm it in your matrix.
Sweetness calculator
Enter the target sucrose sweetness to estimate the use level.
Estimate only, based on the published sweetness range and 1 L ≈ 1 kg. The matrix, process and blend decide the final level.
Process fit
Slightly soluble in water
Stable in dry form and through normal food processing
Stable in mildly acidic to neutral systems
Moderately hygroscopic
Ordering
Entry quantity, packing and sample
Availability In production and available to order. The batch COA, pack and lead time are confirmed against the order.
Samples are drawn from a released lot and travel with that lot's COA. The pack and the retained sample are recorded on the lot file.
Technical documentation
Five documents, one standard.
Quality and procurement pages for Naringin Dihydrochalcone (NDC) 98%. Each card opens the full document; a sample COA and the technical data sheet are available on request.





What to confirm before ordering
- Match the CAS to 18916-17-1; NDC is not NHDC and has a different specification.
- Ask for the naringin fraction and check the solvent residue from hydrogenation.
- NDC is used at parts-per-million levels; a micro-dose premix is usually necessary.
- The long linger is useful in gum and oral care and a problem in a clean-finish beverage.
Buyer questions
Practical answers
What is Naringin Dihydrochalcone (NDC) 98% specified to?
Naringin dihydrochalcone: ≥98.0% (HPLC). The full specification adds Naringin, Appearance, Moisture, pH (1% solution), Solubility and the contaminant panel. Every figure on the batch COA is reported with the method used to produce it.
Which glycoside or extract marker is this?
The catalog grade is Naringin dihydrochalcone, hydrogenated citrus flavonoid. The specification is built around NDC ≥98%, naringin ≤1%, so a total percentage is not accepted as a substitute for the profile. The grade page explains what changes between the published alternatives.
Which applications does this grade fit?
Beverages, Confectionery, Flavour systems, Oral care, Chewing gum. The grade is selected against the application and the process: solubility and clarity for a beverage, bulk and crystallisation for confectionery, flow and compaction for a tabletop or supplement.
Which documents are supplied with the batch?
A batch-specific COA, TDS, SDS, allergen and GMO statements, an origin record and a residual-solvent statement. Third-party heavy-metal or microbiological reports can be arranged, and the specification comparison is issued before the first order.
What is the minimum order and lead time?
1 kg minimum, packed in a 1 kg foil pouch from a released lot; 25 kg fiber drums are available as quantities scale. 3–10 days after specification and order confirmation. Samples are typically 100–500 g and carry the COA of the lot they were drawn from.
Documentation
Released with every lot
- Batch-specific certificate of analysis against the agreed specification
- Technical data sheet with form, CAS or species, carrier, storage and packing
- Safety data sheet in the 16-section format
- Allergen, GMO and origin statements signed for the batch
- Residual-solvent statement for the purification system
- Specification comparison against the specification you sent
Next step
Send the spec. We will confirm the form.
A competitor COA, a target dose or a matrix brief is enough to start. We reply with the grade we can release, the documents behind it and the questions we still need answered.