Plant-Derived Sweeteners & Sweet Proteins · Core range

Neohesperidin Dihydrochalcone (NHDC) 98%

C₂₈H₃₆O₁₅ · CAS 20702-77-6 · Neohesperidin dihydrochalcone, hydrogenated citrus flavonoid

A 98% neohesperidin dihydrochalcone for trace-level sweetness, bitterness modification and mouthfeel, with a clear distinction from naringin DC.

SW-008 Reviewed 20 November 2026 5 technical documents

Neohesperidin dihydrochalcone
≥98.0%
Minimum order
1 kg
Indicative sweetness
1,500–2,000 × sucrose
Indicative lead time
3–10 days

Specification

What the certificate will report

Neohesperidin dihydrochalcone≥98.0% (HPLC)
Neohesperidin≤1.0% (HPLC)
AppearanceWhite to off-white powder
Moisture≤5.0%
pH (1% solution)5.0–7.0
SolubilitySlightly soluble in water; soluble in ethanol
Particle size≥95% through 80 mesh
Bulk density0.35–0.65 g/mL
Heavy metalsPb ≤0.5 · As ≤0.5 · Cd ≤0.5 · Hg ≤0.1 mg/kg
MicrobiologyAPC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent
Chemical formulaC₂₈H₃₆O₁₅
CAS20702-77-6
Marker setNHDC ≥98%, neohesperidin ≤1%
AppearanceWhite to off-white, free-flowing powder
SolubilitySlightly soluble in water; a co-solvent or a diluted pre-mix is usually needed in beverages.

Primary method HPLC-UV — the full HPLC-UV method guide explains what the figure proves. How the COA is built →

Quick inquiry

Ask about this grade

Name, company, email and the question. The product and the page you are reading travel with it, so there is nothing else to select.

We use your details only to answer this inquiry. Country is detected from your connection and used only for freight and compliance. Need a written quotation instead? The full form asks for quantity, preferred form, destination market and the documents you need — those answers are what turn a reply into a priced quotation instead of another round of questions.

Sweetness and application

What the grade tastes like

Indicative sweetness1,500–2,000 × sucrose, indicative
Taste noteIntense sweetness with a slow onset, a long lingering tail and a cooling, slightly menthol-like note at higher doses.
Starting use level0.0003–0.005% in food, depending on the category and the blend
Blend behaviourUsed at trace levels with other high-intensity sweeteners to extend sweetness and modify bitterness.

Taste is matrix-specific The figures above are a starting point for a bench trial, not a promise of the finished product. How the matrix changes the result →

Onset Slow
Finish Long
Mouthfeel Cooling
Off-note Cooling, menthol note at high dose

Indicative profile curated from the published taste note. Confirm it in your matrix.

Sweetness calculator

Enter the target sucrose sweetness to estimate the use level.

Estimated use level0.0040–0.0053%
Per kg / litre0.040–0.053 g per kg / L

Estimate only, based on the published sweetness range and 1 L ≈ 1 kg. The matrix, process and blend decide the final level.

Process fit

Water

Slightly soluble in water

Heat

Stable in dry form and through normal food processing

pH

Stable in mildly acidic to neutral systems

Moisture

Moderately hygroscopic

Ordering

Entry quantity, packing and sample

Minimum order1 kg
Indicative lead time3–10 days
Standard pack1 kg foil pouch · 25 kg fiber drum
Sample100–500 g with lot COA

Availability In production and available to order. The batch COA, pack and lead time are confirmed against the order.

Samples are drawn from a released lot and travel with that lot's COA. The pack and the retained sample are recorded on the lot file.

What to confirm before ordering

  • Match the CAS to 20702-77-6; NHDC is not naringin DC.
  • Test at parts-per-million levels; the long tail changes with dose and matrix.
  • NHDC is used at parts-per-million levels; a micro-dose premix is usually necessary.
  • The long linger is useful in gum and oral care and a problem in a clean-finish beverage.

Buyer questions

Practical answers

What is Neohesperidin Dihydrochalcone (NHDC) 98% specified to?

Neohesperidin dihydrochalcone: ≥98.0% (HPLC). The full specification adds Neohesperidin, Appearance, Moisture, pH (1% solution), Solubility and the contaminant panel. Every figure on the batch COA is reported with the method used to produce it.

Which glycoside or extract marker is this?

The catalog grade is Neohesperidin dihydrochalcone, hydrogenated citrus flavonoid. The specification is built around NHDC ≥98%, neohesperidin ≤1%, so a total percentage is not accepted as a substitute for the profile. The grade page explains what changes between the published alternatives.

Which applications does this grade fit?

Beverages, Confectionery, Chewing gum, Oral care, Flavour systems. The grade is selected against the application and the process: solubility and clarity for a beverage, bulk and crystallisation for confectionery, flow and compaction for a tabletop or supplement.

Which documents are supplied with the batch?

A batch-specific COA, TDS, SDS, allergen and GMO statements, an origin record and a residual-solvent statement. Third-party heavy-metal or microbiological reports can be arranged, and the specification comparison is issued before the first order.

What is the minimum order and lead time?

1 kg minimum, packed in a 1 kg foil pouch from a released lot; 25 kg fiber drums are available as quantities scale. 3–10 days after specification and order confirmation. Samples are typically 100–500 g and carry the COA of the lot they were drawn from.

Documentation

Released with every lot

  • Batch-specific certificate of analysis against the agreed specification
  • Technical data sheet with form, CAS or species, carrier, storage and packing
  • Safety data sheet in the 16-section format
  • Allergen, GMO and origin statements signed for the batch
  • Residual-solvent statement for the purification system
  • Specification comparison against the specification you sent

Next step

Send the spec. We will confirm the form.

A competitor COA, a target dose or a matrix brief is enough to start. We reply with the grade we can release, the documents behind it and the questions we still need answered.