Polyols & Sugar Alcohols · Core range

Mannitol

C₆H₁₄O₆ · CAS 69-65-8 · D-Mannitol, crystalline powder or granules

A mannitol powder for tabletting, sugar-free chewing gum and bakery, specified by assay, particle size and the compactibility that decides a tablet.

SW-029 Reviewed 20 November 2026 5 technical documents

Assay (dried basis)
98.0–101.0%
Minimum order
1 kg
Indicative sweetness
50–70% of sucrose
Indicative lead time
1–7 days

Specification

What the certificate will report

Assay (dried basis)98.0–101.0% (HPLC-RI)
AppearanceWhite crystalline powder or granules
Moisture≤0.5%
pH (5% solution)5.0–7.5
SolubilitySoluble in water; less hygroscopic than sorbitol
Particle size≥95% through 60 mesh; spray-dried on request
Bulk density0.50–0.80 g/mL
Reducing sugars≤0.1%
Heavy metalsPb ≤0.5 · As ≤0.5 · Cd ≤0.5 · Hg ≤0.1 mg/kg
MicrobiologyAPC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent
Chemical formulaC₆H₁₄O₆
CAS69-65-8
Marker setMannitol 98.0–101.0%, reducing sugars ≤0.1%
AppearanceWhite crystalline powder or granules
SolubilitySoluble in water; low hygroscopicity and a cooling effect, with good tablet compaction in the right grade.

Primary method HPLC-RI — the full HPLC-RI method guide explains what the figure proves. How the COA is built →

Quick inquiry

Ask about this grade

Name, company, email and the question. The product and the page you are reading travel with it, so there is nothing else to select.

We use your details only to answer this inquiry. Country is detected from your connection and used only for freight and compliance. Need a written quotation instead? The full form asks for quantity, preferred form, destination market and the documents you need — those answers are what turn a reply into a priced quotation instead of another round of questions.

Sweetness and application

What the grade tastes like

Indicative sweetness50–70% of sucrose, indicative
Taste noteMild sweetness with a cooling effect and a slightly dry mouthfeel; the tablet mouthfeel is grade-dependent.
Starting use level5–30% in tabletting and chewing gum, depending on the function
Blend behaviourBlends with xylitol, sorbitol and high-intensity sweeteners; spray-dried mannitol can improve tablet hardness.

Taste is matrix-specific The figures above are a starting point for a bench trial, not a promise of the finished product. How the matrix changes the result →

Onset Medium
Finish Short
Mouthfeel Cooling
Off-note Dry, cooling mouthfeel

Indicative profile curated from the published taste note. Confirm it in your matrix.

Sweetness calculator

Enter the target sucrose sweetness to estimate the use level.

Estimated use level11.43–16.00%
Per kg / litre114.29–160.00 g per kg / L

Estimate only, based on the published sweetness range and 1 L ≈ 1 kg. The matrix, process and blend decide the final level.

Process fit

Water

Soluble in water

Heat

Stable in dry form and through normal processing

pH

Stable across normal food pH

Moisture

Low

Ordering

Entry quantity, packing and sample

Minimum order1 kg
Indicative lead time1–7 days
Standard pack1 kg foil pouch · 25 kg fiber drum
Sample100–500 g with lot COA

Availability In production and available to order. The batch COA, pack and lead time are confirmed against the order.

Samples are drawn from a released lot and travel with that lot's COA. The pack and the retained sample are recorded on the lot file.

What to confirm before ordering

  • Confirm the crystal or spray-dried grade and the compaction data.
  • Check the tablet hardness and the mouthfeel in the final formula.
  • Mannitol is less hygroscopic than sorbitol but still needs a sealed pack.
  • Check reducing sugars and the assay basis.

Buyer questions

Practical answers

What is Mannitol specified to?

Assay (dried basis): 98.0–101.0% (HPLC-RI). The full specification adds Appearance, Moisture, pH (5% solution), Solubility, Particle size and the contaminant panel. Every figure on the batch COA is reported with the method used to produce it.

Which polyol and crystal form is this?

The catalog grade is D-Mannitol, crystalline powder or granules. Moisture, particle size and the other-polyol profile are release parameters, not packing details. The grade page explains the crystal forms and the applications each one fits.

Which applications does this grade fit?

Tabletting, Chewing gum, Bakery, Confectionery, Oral care. The grade is selected against the application and the process: solubility and clarity for a beverage, bulk and crystallisation for confectionery, flow and compaction for a tabletop or supplement.

Which documents are supplied with the batch?

A batch-specific COA, TDS, SDS, allergen and GMO statements, an origin record and a residual-solvent statement. Third-party heavy-metal or microbiological reports can be arranged, and the specification comparison is issued before the first order.

What is the minimum order and lead time?

1 kg minimum, packed in a 1 kg foil pouch from a released lot; 25 kg fiber drums are available as quantities scale. 1–7 days after specification and order confirmation. Samples are typically 100–500 g and carry the COA of the lot they were drawn from.

Documentation

Released with every lot

  • Batch-specific certificate of analysis against the agreed specification
  • Technical data sheet with form, CAS or species, carrier, storage and packing
  • Safety data sheet in the 16-section format
  • Allergen, GMO and origin statements signed for the batch
  • Residual-solvent statement for the purification system
  • Specification comparison against the specification you sent

Next step

Send the spec. We will confirm the form.

A competitor COA, a target dose or a matrix brief is enough to start. We reply with the grade we can release, the documents behind it and the questions we still need answered.